Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / M52277EVB.h

diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index e9424b4a07cf14d20da09aebe4b6970f77adc98e..7798b066252273944942c5348e45e5bf18417aa2 100644 (file)
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -18,11 +18,9 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_M52277EVB       /* M52277EVB board */
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
-#define CONFIG_BAUDRATE                        115200
 
 #undef CONFIG_WATCHDOG
 
@@ -32,30 +30,6 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/* Command line configuration */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_REGINFO
-#undef CONFIG_CMD_USB
-#undef CONFIG_CMD_BMP
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
 
 #define CONFIG_HOSTNAME                        M52277EVB
 #define CONFIG_SYS_UBOOT_END           0x3FFFF
@@ -97,10 +71,8 @@
        ""
 #endif
 
-#define CONFIG_BOOTDELAY               3       /* autoboot after 3 seconds */
 /* LCD */
 #ifdef CONFIG_CMD_BMP
-#define CONFIG_LCD
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_LCD_LOGO
 #define CONFIG_SHARP_LQ035Q7DH06
@@ -108,11 +80,6 @@
 
 /* USB */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION
 #define CONFIG_SYS_USB_EHCI_REGS_BASE  0xFC0B0000
 #define CONFIG_SYS_USB_EHCI_CPU_INIT
 #endif
@@ -135,14 +102,11 @@
 #define CONFIG_SYS_IMMR                        CONFIG_SYS_MBAR
 
 /* DSPI and Serial Flash */
-#define CONFIG_CF_SPI
 #define CONFIG_CF_DSPI
 #define CONFIG_HARD_SPI
 #define CONFIG_SYS_SBFHDR_SIZE         0x7
 #ifdef CONFIG_CMD_SPI
 #      define CONFIG_SYS_DSPI_CS2
-#      define CONFIG_SPI_FLASH
-#      define CONFIG_SPI_FLASH_STMICRO
 
 #      define CONFIG_SYS_DSPI_CTAR0    (DSPI_CTAR_TRSZ(7) | \
                                         DSPI_CTAR_PCSSCK_1CLK | \
@@ -160,18 +124,6 @@
 
 #define CONFIG_PRAM            2048    /* 2048 KB */
 
-#define CONFIG_SYS_PROMPT      "-> "
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE      1024    /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
-
 #define CONFIG_SYS_LOAD_ADDR   (CONFIG_SYS_SDRAM_BASE + 0x10000)
 
 #define CONFIG_SYS_MBAR                0xFC000000
@@ -228,10 +180,7 @@
  * crc error warning if there is no correct environment on the flash.
  */
 #ifdef CONFIG_CF_SBF
-#      define CONFIG_ENV_IS_IN_SPI_FLASH
 #      define CONFIG_ENV_SPI_CS        2
-#else
-#      define CONFIG_ENV_IS_IN_FLASH   1
 #endif
 #define CONFIG_ENV_OVERWRITE           1
 
@@ -267,6 +216,10 @@
 #      define CONFIG_SYS_FLASH_BANKS_LIST      { CONFIG_SYS_CS0_BASE }
 #endif
 
+#define LDS_BOARD_TEXT \
+        arch/m68k/cpu/mcf5227x/built-in.o   (.text*) \
+       arch/m68k/lib/built-in.o            (.text*)
+
 /*
  * This is setting for JFFS2 support in u-boot.
  * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.