Convert CONFIG_CMD_EEPROM et al to Kconfig

[people/ms/u-boot.git] / include / configs / MIP405.h

diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index c0a1cb4cc483bc9b76d45fb1f14b5735f36aedd5..64c6ed100f1be13d52d62727c973ee0455524450 100644 (file)
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -17,7 +17,6 @@
  * (easy to change)
  ***********************************************************/
 #define CONFIG_405GP           1       /* This is a PPC405 CPU         */
-#define CONFIG_MIP405          1       /* ...on a MIP405 board         */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF80000
 
@@ -47,18 +46,12 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_BSP
-
-#if !defined(CONFIG_MIP405T)
-#endif
 
 /**************************************************************
  * I2C Stuff:
@@ -96,7 +89,6 @@
 /**************************************************************
  * Environment definitions
  **************************************************************/
-#define CONFIG_BAUDRATE                9600    /* STD Baudrate */
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
 /* #define CONFIG_BOOT_RETRY_TIME      -10     /XXX* feature is available but not enabled */
 
@@ -106,20 +98,13 @@
 #define CONFIG_IPADDR          10.0.0.100
 #define CONFIG_SERVERIP                10.0.0.1
 #define CONFIG_PREBOOT
-/***************************************************************
- * defines if the console is stored in the environment
- ***************************************************************/
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* stdin, stdout and stderr are in evironment */
 /***************************************************************
  * defines if an overwrite_console function exists
  *************************************************************/
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
 /***************************************************************
  * defines if the overwrite_console should be stored in the
  * environment
  **************************************************************/
-#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
 /**************************************************************
  * loads config
@@ -168,10 +153,8 @@
 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
-#define CONFIG_PCI                     /* include pci support          */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host        */
-#define CONFIG_PCI_PNP                 /* pci plug-and-play            */
                                        /* resource configuration       */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000  /* PCI Vendor ID: to-do!!!      */
 #define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
@@ -259,7 +242,6 @@
 /* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
 #define FLASH_SIZE_PRELIM       3  /* maximal flash FLASH size bank #0 */
 
-#define CONFIG_BOARD_EARLY_INIT_F 1
 #define CONFIG_BOARD_EARLY_INIT_R
 
 /* Peripheral Bus Mapping */
@@ -312,7 +294,7 @@
 /************************************************************
  * IDE/ATA stuff
  ************************************************************/
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
 #define CONFIG_SYS_IDE_MAXBUS          1   /* MIP405T has only one IDE bus     */
 #else
 #define CONFIG_SYS_IDE_MAXBUS          2   /* max. 2 IDE busses        */
@@ -340,30 +322,19 @@
 /************************************************************
  * DISK Partition support
  ************************************************************/
-#define CONFIG_DOS_PARTITION
-#define CONFIG_MAC_PARTITION
-#define CONFIG_ISO_PARTITION /* Experimental */
 
 /************************************************************
  * Video support
  ************************************************************/
-#define CONFIG_VIDEO                   /*To enable video controller support */
-#define CONFIG_VIDEO_CT69000
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
 #undef CONFIG_VIDEO_ONBOARD
 /************************************************************
  * USB support EXPERIMENTAL
  ************************************************************/
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 #define CONFIG_USB_UHCI
-#define CONFIG_USB_KEYBOARD
 
 /* Enable needed helper functions */
-#define CONFIG_SYS_STDIO_DEREGISTER            /* needs stdio_deregister */
 #endif
 /************************************************************
  * Debug support
@@ -377,15 +348,4 @@
  ************************************************************/
 #define CONFIG_BZIP2           1
 
-/************************************************************
- * Ident
- ************************************************************/
-
-#define VERSION_TAG "released"
-#if !defined(CONFIG_MIP405T)
-#define CONFIG_ISO_STRING "MEV-10072-001"
-#else
-#define CONFIG_ISO_STRING "MEV-10082-001"
-#endif
-
 #endif /* __CONFIG_H */