configs: Re-sync with cmd/Kconfig

[people/ms/u-boot.git] / include / configs / MIP405.h

diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index ba93c1801739650c61cdaac858c8bb5a5d4b2343..75a26edb25bad54510fcef88462303cf5ab2ff04 100644 (file)
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -21,7 +21,6 @@
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF80000
 
-
 /***********************************************************
  * Note that it may also be a MIP405T board which is a subset of the
  * MIP405
@@ -37,7 +36,6 @@
  ***********************************************************/
 #define CONFIG_SYS_CLK_FREQ    33000000 /* external frequency to pll   */
 
-
 /*
  * BOOTP options
  */
@@ -46,32 +44,22 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_BSP
 
 #if !defined(CONFIG_MIP405T)
-    #define CONFIG_CMD_USB
 #endif
 
-
-#define         CONFIG_SYS_HUSH_PARSER
 /**************************************************************
  * I2C Stuff:
  * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address
@@ -94,7 +82,6 @@
                                        /* last 6 bits of the address   */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* and takes up to 10 msec */
 
-
 #define CONFIG_ENV_IS_IN_EEPROM        1       /* use EEPROM for environment vars */
 #define CONFIG_ENV_OFFSET              0x00000 /* environment starts at the beginning of the EEPROM */
 #define CONFIG_ENV_SIZE                0x00800 /* 2k bytes may be used for env vars */
@@ -160,7 +147,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 1 ... 12 MB in DRAM  */
 
 #define CONFIG_CONS_INDEX      1       /* Use UART0                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
@@ -286,7 +272,6 @@
 #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
 #define CONFIG_PORT_ADDR       PER_PLD_ADDR + 5
 
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in On Chip SRAM)
  */
@@ -412,5 +397,4 @@
 #define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version"
 #endif
 
-
 #endif /* __CONFIG_H */