Convert CONFIG_VIDEO to Kconfig

[people/ms/u-boot.git] / include / configs / MIP405.h

diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index 1a793d78dd5adddc4871f2d0202031f0f40672a0..e461fe9ff30a9a0bd0b6183f069b42bd32bbf92a 100644 (file)
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -17,11 +17,9 @@
  * (easy to change)
  ***********************************************************/
 #define CONFIG_405GP           1       /* This is a PPC405 CPU         */
-#define CONFIG_MIP405          1       /* ...on a MIP405 board         */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF80000
 
-
 /***********************************************************
  * Note that it may also be a MIP405T board which is a subset of the
  * MIP405
@@ -37,7 +35,6 @@
  ***********************************************************/
 #define CONFIG_SYS_CLK_FREQ    33000000 /* external frequency to pll   */
 
-
 /*
  * BOOTP options
  */
@@ -46,32 +43,19 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_BSP
 
-#if !defined(CONFIG_MIP405T)
-    #define CONFIG_CMD_USB
-#endif
-
-
-#define         CONFIG_SYS_HUSH_PARSER
 /**************************************************************
  * I2C Stuff:
  * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address
@@ -94,7 +78,6 @@
                                        /* last 6 bits of the address   */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* and takes up to 10 msec */
 
-
 #define CONFIG_ENV_IS_IN_EEPROM        1       /* use EEPROM for environment vars */
 #define CONFIG_ENV_OFFSET              0x00000 /* environment starts at the beginning of the EEPROM */
 #define CONFIG_ENV_SIZE                0x00800 /* 2k bytes may be used for env vars */
@@ -110,10 +93,8 @@
  * Environment definitions
  **************************************************************/
 #define CONFIG_BAUDRATE                9600    /* STD Baudrate */
-#define CONFIG_BOOTDELAY       5
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
 /* #define CONFIG_BOOT_RETRY_TIME      -10     /XXX* feature is available but not enabled */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check console even if bootdelay = 0 */
 
 #define CONFIG_BOOTCOMMAND     "diskboot 400000 0:1; bootm" /* autoboot command                */
 #define CONFIG_BOOTARGS                "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
@@ -285,7 +266,6 @@
 #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
 #define CONFIG_PORT_ADDR       PER_PLD_ADDR + 5
 
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in On Chip SRAM)
  */
@@ -328,7 +308,7 @@
 /************************************************************
  * IDE/ATA stuff
  ************************************************************/
-#if defined(CONFIG_MIP405T)
+#if defined(CONFIG_TARGET_MIP405T)
 #define CONFIG_SYS_IDE_MAXBUS          1   /* MIP405T has only one IDE bus     */
 #else
 #define CONFIG_SYS_IDE_MAXBUS          2   /* max. 2 IDE busses        */
@@ -363,7 +343,6 @@
 /************************************************************
  * Video support
  ************************************************************/
-#define CONFIG_VIDEO                   /*To enable video controller support */
 #define CONFIG_VIDEO_CT69000
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
@@ -374,10 +353,9 @@
 /************************************************************
  * USB support EXPERIMENTAL
  ************************************************************/
-#if !defined(CONFIG_MIP405T)
+#if !defined(CONFIG_TARGET_MIP405T)
 #define CONFIG_USB_UHCI
 #define CONFIG_USB_KEYBOARD
-#define CONFIG_USB_STORAGE
 
 /* Enable needed helper functions */
 #define CONFIG_SYS_STDIO_DEREGISTER            /* needs stdio_deregister */
@@ -394,22 +372,4 @@
  ************************************************************/
 #define CONFIG_BZIP2           1
 
-/************************************************************
- * Ident
- ************************************************************/
-
-#define VERSION_TAG "released"
-#if !defined(CONFIG_MIP405T)
-#define CONFIG_ISO_STRING "MEV-10072-001"
-#else
-#define CONFIG_ISO_STRING "MEV-10082-001"
-#endif
-
-#if !defined(CONFIG_BOOT_PCI)
-#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
-#else
-#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version"
-#endif
-
-
 #endif /* __CONFIG_H */