Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / MPC8308RDB.h

diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index 9b196ad2e454033376ad28646015367d6ceab1c8..0f94d4da07b09cf84223244d94ce2f155f0b7ed9 100644 (file)
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -9,37 +9,19 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
-
 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300            1 /* E300 family */
 #define CONFIG_MPC830x         1 /* MPC830x family */
 #define CONFIG_MPC8308         1 /* MPC8308 CPU specific */
-#define CONFIG_MPC8308RDB      1 /* MPC8308RDB board specific */
-
-#define        CONFIG_SYS_TEXT_BASE    0xFE000000
 
 #define CONFIG_MISC_INIT_R
 
-/* new uImage format support */
-#define CONFIG_FIT                     1
-#define CONFIG_FIT_VERBOSE             1
-
-#define CONFIG_MMC     1
-
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_SYS_FSL_ESDHC_USE_PIO
-
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
 #endif
 
 /*
@@ -210,7 +192,7 @@
  */
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (512 * 1024) /* Reserved for malloc */
 
 /*
@@ -316,7 +298,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -327,14 +308,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR + 0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -353,11 +326,7 @@
  * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins.
  */
 #ifdef CONFIG_MPC8XXX_SPI
-#define CONFIG_CMD_SPI
 #define CONFIG_USE_SPIFLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_CMD_SF
 #endif
 
 /*
@@ -388,12 +357,9 @@
 /* enable PCIE clock */
 #define CONFIG_SYS_SCCR_PCIEXP1CM      1
 
-#define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCIE
 
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
-
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
 #define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
 
@@ -425,7 +391,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + \
                                 CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_ENV_SECT_SIZE   0x10000 /* 64K(one sector) for env */
@@ -440,35 +405,18 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-
-#define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR           0x2000000 /* default load address */
 
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
@@ -478,6 +426,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -536,11 +485,8 @@
 #define CONFIG_HAS_ETH1
 #endif
 
-#define CONFIG_BAUDRATE 115200
-
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY       5       /* -1 disables auto-boot */
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \