common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / MPC8308RDB.h

diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index 551b72d15309cff788da6bfeb19d3776209f9ce5..c72d36a7619eb5058817eaac787215f03e7c185d 100644 (file)
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -9,8 +9,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /*
  * High Level Configuration Options
  */
@@ -23,10 +21,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-/* new uImage format support */
-#define CONFIG_FIT                     1
-#define CONFIG_FIT_VERBOSE             1
-
 #define CONFIG_MMC     1
 
 #ifdef CONFIG_MMC
@@ -35,9 +29,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_SYS_FSL_ESDHC_USE_PIO
 
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -209,7 +201,7 @@
  */
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (512 * 1024) /* Reserved for malloc */
 
 /*
@@ -315,7 +307,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -326,14 +317,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR + 0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -352,10 +335,7 @@
  * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins.
  */
 #ifdef CONFIG_MPC8XXX_SPI
-#define CONFIG_CMD_SPI
 #define CONFIG_USE_SPIFLASH
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_CMD_SF
 #endif
 
 /*
@@ -446,11 +426,7 @@
  * Command line configuration.
  */
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 
@@ -474,6 +450,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -536,7 +513,6 @@
 
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY       5       /* -1 disables auto-boot */
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \