common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / MPC8308RDB.h

diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index d315729b8b1089837a2a654bb2a2d3300bfe22b9..c72d36a7619eb5058817eaac787215f03e7c185d 100644 (file)
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -13,7 +13,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300            1 /* E300 family */
-#define CONFIG_MPC83xx         1 /* MPC83xx family */
 #define CONFIG_MPC830x         1 /* MPC830x family */
 #define CONFIG_MPC8308         1 /* MPC8308 CPU specific */
 #define CONFIG_MPC8308RDB      1 /* MPC8308RDB board specific */
@@ -22,10 +21,6 @@
 
 #define CONFIG_MISC_INIT_R
 
-/* new uImage format support */
-#define CONFIG_FIT                     1
-#define CONFIG_FIT_VERBOSE             1
-
 #define CONFIG_MMC     1
 
 #ifdef CONFIG_MMC
@@ -34,9 +29,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_SYS_FSL_ESDHC_USE_PIO
 
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -208,7 +201,7 @@
  */
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
 
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (512 * 1024) /* Reserved for malloc */
 
 /*
@@ -314,7 +307,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -325,14 +317,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR + 0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -351,11 +335,7 @@
  * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins.
  */
 #ifdef CONFIG_MPC8XXX_SPI
-#define CONFIG_CMD_SPI
 #define CONFIG_USE_SPIFLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_CMD_SF
 #endif
 
 /*
@@ -445,15 +425,8 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 
@@ -462,7 +435,6 @@
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR           0x2000000 /* default load address */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 
 #define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
 
@@ -471,7 +443,6 @@
 #define CONFIG_SYS_MAXARGS     16      /* max number of command args */
 /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -479,6 +450,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -541,7 +513,6 @@
 
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY       5       /* -1 disables auto-boot */
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \