drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / MPC8315ERDB.h

diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index 0f9f436e33dedd3a239fe1d9863e07b60af63b72..a500fd1d8d36ca26e16ca19eedc233bca489582c 100644 (file)
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -15,14 +15,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS  16384
 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
 
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_TEXT_BASE   0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#endif /* CONFIG_NAND_SPL */
-#endif /* CONFIG_NAND_U_BOOT */
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xFE000000
 #endif
@@ -35,7 +27,6 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300            1 /* E300 family */
-#define CONFIG_MPC83xx         1 /* MPC83xx family */
 #define CONFIG_MPC831x         1 /* MPC831x CPU family */
 #define CONFIG_MPC8315         1 /* MPC8315 CPU specific */
 #define CONFIG_MPC8315ERDB     1 /* MPC8315ERDB board specific */
@@ -94,10 +85,6 @@
  */
 #define CONFIG_SYS_IMMR                0xE0000000
 
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#define CONFIG_DEFAULT_IMMR    CONFIG_SYS_IMMR
-#endif
-
 /*
  * Arbiter Setup
  */
@@ -180,7 +167,7 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (512 * 1024) /* Reserved for malloc */
 
 /*
@@ -252,10 +239,9 @@
 #define CONFIG_CMD_MTDPARTS
 #define MTDIDS_DEFAULT                 "nand0=e0600000.flash"
 #define MTDPARTS_DEFAULT               \
-       "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)"
+       "mtdparts=e0600000.flash:512k(uboot),128k(env),6m@1m(kernel),-(fs)"
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_CMD_NAND                        1
 #define CONFIG_NAND_FSL_ELBC           1
 #define CONFIG_SYS_NAND_BLOCK_SIZE     16384
@@ -282,17 +268,10 @@
                                | OR_FCM_EHTR)
                                /* 0xFFFF8396 */
 
-#ifdef CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM
-#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM
-#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM
-#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM
-#else
 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM
 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM
 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM
 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM
-#endif
 
 #define CONFIG_SYS_LBLAWBAR1_PRELIM    CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_LBLAWAR1_PRELIM     (LBLAWAR_EN | LBLAWAR_32KB)
@@ -311,7 +290,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         (CONFIG_83XX_CLKIN * 2)
@@ -322,14 +300,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -387,7 +357,6 @@
 #define CONFIG_SYS_PCIE2_IO_PHYS       0xD1000000
 #define CONFIG_SYS_PCIE2_IO_SIZE       0x00800000
 
-#define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCIE
 
@@ -400,8 +369,6 @@
 #define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_SYS_SCCR_USBDRCM                3
 
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_USB_PHY_TYPE    "utmi"
@@ -454,22 +421,12 @@
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
  * Environment
  */
-#if defined(CONFIG_NAND_U_BOOT)
-       #define CONFIG_ENV_IS_IN_NAND   1
-       #define CONFIG_ENV_OFFSET               (512 * 1024)
-       #define CONFIG_ENV_SECT_SIZE    CONFIG_SYS_NAND_BLOCK_SIZE
-       #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
-       #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
-       #define CONFIG_ENV_RANGE        (CONFIG_ENV_SECT_SIZE * 4)
-       #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
-                                                CONFIG_ENV_RANGE)
-#elif !defined(CONFIG_SYS_RAMBOOT)
+#if !defined(CONFIG_SYS_RAMBOOT)
        #define CONFIG_ENV_IS_IN_FLASH  1
        #define CONFIG_ENV_ADDR         \
                        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
@@ -496,19 +453,9 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_PCI
 
-#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
 
@@ -538,6 +485,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /*
  * Core HID Setup
@@ -634,7 +582,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*
@@ -652,7 +599,6 @@
 
 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
@@ -683,7 +629,6 @@
        "tftp $fdtaddr $fdtfile;"                                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-
 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
 
 #endif /* __CONFIG_H */