#define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */
#define CONFIG_MPC8349 /* MPC8349 specific */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFEF00000
-#endif
-
#define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */
#define CONFIG_MISC_INIT_F
/* The CF card interface on the back of the board */
#define CONFIG_COMPACT_FLASH
#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
-#define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */
#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */
#endif
#ifdef CONFIG_SATA_SIL3114
#define CONFIG_SYS_SATA_MAX_DEVICE 4
-#define CONFIG_LIBATA
#define CONFIG_LBA48
#endif
#ifdef CONFIG_TSEC_ENET
#define CONFIG_MII
-#define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */
#define CONFIG_TSEC1
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_SDRAM
-
-#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
- || defined(CONFIG_USB_STORAGE)
- #define CONFIG_SUPPORT_VFAT
-#endif
-
-#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
-#endif
-
-#ifdef CONFIG_PCI
- #define CONFIG_CMD_PCI
-#endif
/* Watchdog */
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
-#if defined(CONFIG_CMD_KGDB)
- #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
- #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-
- /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
- /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
/*
* For booting Linux, the board info and command line data
* have to be in the first 256 MB of memory, since this is
#define CONFIG_NETDEV "eth0"
-#ifdef CONFIG_MPC8349ITX
-#define CONFIG_HOSTNAME "mpc8349emitx"
-#else
-#define CONFIG_HOSTNAME "mpc8349emitxgp"
-#endif
-
/* Default path and filenames */
#define CONFIG_ROOTPATH "/nfsroot/rootfs"
#define CONFIG_BOOTFILE "uImage"
#endif
-#define CONFIG_BOOTARGS \
- "root=/dev/nfs rw" \
- " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \
- " ip=" __stringify(CONFIG_IPADDR) ":" \
- __stringify(CONFIG_SERVERIP) ":" \
- __stringify(CONFIG_GATEWAYIP) ":" \
- __stringify(CONFIG_NETMASK) ":" \
- CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \
- " console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE)
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=" __stringify(CONSOLE) "\0" \
"netdev=" CONFIG_NETDEV "\0" \