configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / MPC837XEMDS.h

diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index f52e77a3a7c71591f331811dea5363a8634464a3..68a8e7120becab878ea8c333b8ac13c4f8ebcc80 100644 (file)
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -8,11 +8,12 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300            1 /* E300 family */
-#define CONFIG_MPC83xx         1 /* MPC83xx family */
 #define CONFIG_MPC837x         1 /* MPC837x CPU specific */
 #define CONFIG_MPC837XEMDS     1 /* MPC837XEMDS board specific */
 
@@ -281,7 +282,6 @@
  * NAND Flash on the Local Bus
  */
 #define CONFIG_CMD_NAND                1
-#define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_NAND_FSL_ELBC   1
 
@@ -308,7 +308,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -319,14 +318,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* Pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -388,6 +379,11 @@ extern int board_pci_host_broken(void);
 #define CONFIG_PQ_MDS_PIB      1 /* PQ MDS Platform IO Board */
 
 #define CONFIG_HAS_FSL_DR_USB  1 /* fixup device tree for the DR USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
@@ -484,8 +480,6 @@ extern int board_pci_host_broken(void);
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
@@ -495,11 +489,6 @@ extern int board_pci_host_broken(void);
     #define CONFIG_CMD_PCI
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history */
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */