Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / MPC8548CDS.h

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 8deb241c39167537f91a6efb0c2a58dad0f8f38b..1115af978446babd0e68fa84845019b2f21b9ae7 100644 (file)
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -13,6 +13,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 #ifdef CONFIG_36BIT
 #define CONFIG_PHYS_64BIT
 #endif
@@ -20,7 +22,6 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48 */
 #define CONFIG_MPC8548         1       /* MPC8548 specific */
 #define CONFIG_MPC8548CDS      1       /* MPC8548CDS board specific */
 
@@ -75,7 +76,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR2
+#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
@@ -320,7 +321,6 @@ extern unsigned long get_clock_freq(void);
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX      2
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -335,7 +335,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_HUSH_PARSER
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT               1
 #define CONFIG_OF_BOARD_SETUP          1
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
@@ -424,7 +423,6 @@ extern unsigned long get_clock_freq(void);
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#define CONFIG_E1000                   /* Define e1000 pci Ethernet card */
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 
@@ -492,14 +490,10 @@ extern unsigned long get_clock_freq(void);
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
@@ -516,7 +510,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
 #else
@@ -525,7 +518,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -537,23 +529,16 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*
  * Environment Configuration
  */
-
-/* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_HAS_ETH0
-#define CONFIG_ETHADDR  00:E0:0C:00:00:FD
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR         00:E0:0C:00:01:FD
 #define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR         00:E0:0C:00:02:FD
 #define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR         00:E0:0C:00:03:FD
 #endif
 
 #define CONFIG_IPADDR   192.168.1.253