mx53: Add Board support for GE PPD

[people/ms/u-boot.git] / include / configs / MPC8548CDS.h

diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index a84ebfd5d1cfa1205b52d79d4be64d72a6cf4a0d..b47b414d396de0013f2c192b7d48f916502f8b1c 100644 (file)
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -13,18 +13,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_BOOKE           1       /* BOOKE */
-#define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC8548         1       /* MPC8548 specific */
-#define CONFIG_MPC8548CDS      1       /* MPC8548CDS board specific */
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xfff80000
 #endif
@@ -32,9 +20,8 @@
 #define CONFIG_SYS_SRIO
 #define CONFIG_SRIO1                   /* SRIO port 1 */
 
-#define CONFIG_PCI             /* enable any pci type devices */
 #define CONFIG_PCI1            /* PCI controller 1 */
-#define CONFIG_PCIE1           /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE1           /* PCIE controller 1 (slot 1) */
 #undef CONFIG_PCI2
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
@@ -44,7 +31,6 @@
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_INTERRUPTS              /* enable pci, srio, ddr interrupts */
-#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 
 #define CONFIG_FSL_VIA
 
@@ -76,7 +62,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR2
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
@@ -88,7 +73,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000      /* DDR is system memory*/
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
@@ -132,7 +116,6 @@ extern unsigned long get_clock_freq(void);
  *
  */
 
-
 /*
  * Local Bus Definitions
  */
@@ -331,14 +314,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT               1
-#define CONFIG_OF_BOARD_SETUP          1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /*
  * I2C
  */
@@ -419,9 +394,6 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 #if defined(CONFIG_PCI)
-
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
@@ -429,7 +401,6 @@ extern unsigned long get_clock_freq(void);
 
 #endif /* CONFIG_PCI */
 
-
 #if defined(CONFIG_TSEC_ENET)
 
 #define CONFIG_MII             1       /* MII PHY management */
@@ -461,13 +432,11 @@ extern unsigned long get_clock_freq(void);
 
 /* Options are: eTSEC[0-3] */
 #define CONFIG_ETHPRIME                "eTSEC0"
-#define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
 #endif /* CONFIG_TSEC_ENET */
 
 /*
  * Environment
  */
-#define CONFIG_ENV_IS_IN_FLASH 1
 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 #define CONFIG_ENV_ADDR        0xfff80000
 #else
@@ -487,21 +456,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
@@ -511,14 +465,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 
 /*
  * For booting Linux, the board info and command line data
@@ -555,11 +501,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_LOADADDR        1000000 /*default location for tftp and bootm*/
 
-#define CONFIG_BOOTDELAY 10    /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS         /* the boot command will set bootargs*/
-
-#define CONFIG_BAUDRATE        115200
-
 #define        CONFIG_EXTRA_ENV_SETTINGS               \
        "hwconfig=fsl_ddr:ecc=off\0"            \
        "netdev=eth0\0"                         \
@@ -578,7 +519,7 @@ extern unsigned long get_clock_freq(void);
        "consoledev=ttyS1\0"                    \
        "ramdiskaddr=2000000\0"                 \
        "ramdiskfile=ramdisk.uboot\0"           \
-       "fdtaddr=c00000\0"                      \
+       "fdtaddr=1e00000\0"                     \
        "fdtfile=mpc8548cds.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND                                          \
@@ -590,7 +531,6 @@ extern unsigned long get_clock_freq(void);
    "tftp $fdtaddr $fdtfile;"                                           \
    "bootm $loadaddr - $fdtaddr"
 
-
 #define CONFIG_RAMBOOTCOMMAND \
    "setenv bootargs root=/dev/ram rw "                                 \
       "console=$consoledev,$baudrate $othbootargs;"                    \