Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / MPC8560ADS.h

diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index 2938a39e67b298342ac3ff4d27590b5fda468248..7f854c524fe6e2d43d4af077210600a5a1164993 100644 (file)
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -19,25 +19,18 @@
 #define __CONFIG_H
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE           1       /* BOOKE */
-#define CONFIG_E500            1       /* BOOKE e500 family */
 #define CONFIG_CPM2            1       /* has CPM2 */
-#define CONFIG_MPC8560ADS      1       /* MPC8560ADS board specific */
-#define CONFIG_MPC8560         1
 
 /*
  * default CCARBAR is at 0xff700000
  * assume U-Boot is less than 0.5MB
  */
-#define        CONFIG_SYS_TEXT_BASE    0xfff80000
 
-#define CONFIG_PCI
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #undef CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_FSL_LAW         1       /* Use common FSL init code */
 #define CONFIG_RESET_PHY_R     1       /* Call reset_phy() */
 
 /*
@@ -73,7 +66,6 @@
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW    CONFIG_SYS_CCSRBAR
 
 /* DDR Setup */
-#define CONFIG_SYS_FSL_DDR1
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
 #undef CONFIG_FSL_DDR_INTERACTIVE
@@ -83,7 +75,6 @@
 #define CONFIG_SYS_DDR_SDRAM_BASE      0x00000000      /* DDR is system memory*/
 #define CONFIG_SYS_SDRAM_BASE          CONFIG_SYS_DDR_SDRAM_BASE
 
-#define CONFIG_NUM_DDR_CONTROLLERS     1
 #define CONFIG_DIMM_SLOTS_PER_CTLR     1
 #define CONFIG_CHIP_SELECTS_PER_CTRL   (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 
@@ -216,8 +207,6 @@
 #undef  CONFIG_CONS_NONE       /* define if console on something else */
 #define CONFIG_CONS_INDEX       1  /* which serial channel for console */
 
-#define CONFIG_BAUDRATE                115200
-
 #define CONFIG_SYS_BAUDRATE_TABLE  \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
@@ -251,9 +240,6 @@
 #define CONFIG_SYS_PCI1_IO_SIZE        0x100000        /* 1M */
 
 #if defined(CONFIG_PCI)
-
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play */
-
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
@@ -343,13 +329,10 @@
  * Environment
  */
 #ifndef CONFIG_SYS_RAMBOOT
-  #define CONFIG_ENV_IS_IN_FLASH       1
   #define CONFIG_ENV_ADDR              (CONFIG_SYS_MONITOR_BASE + 0x40000)
   #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
   #define CONFIG_ENV_SIZE              0x2000
 #else
-  #define CONFIG_SYS_NO_FLASH          1       /* Flash is not usable now */
-  #define CONFIG_ENV_IS_NOWHERE        1       /* Store ENV in memory only */
   #define CONFIG_ENV_ADDR              (CONFIG_SYS_MONITOR_BASE - 0x1000)
   #define CONFIG_ENV_SIZE              0x2000
 #endif
@@ -361,41 +344,14 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_ETHER_ON_FCC)
-#endif
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
-#define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x1000000       /* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-    #define CONFIG_SYS_CBSIZE  1024            /* Console I/O Buffer Size */
-#else
-    #define CONFIG_SYS_CBSIZE  256             /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 
 /*
@@ -432,10 +388,6 @@
 
 #define CONFIG_LOADADDR  200000        /* default location for tftp and bootm */
 
-#undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE        115200
-
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "consoledev=ttyCPM\0"                                           \