configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / MPC8569MDS.h

diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 3bf01b2c12ef035a895f680ce3c6ce6a03a38c4c..1224a20f46aad78f77fa28e7e9b09df23f0708c5 100644 (file)
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -10,10 +10,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 /* High Level Configuration Options */
 #define CONFIG_BOOKE           1       /* BOOKE */
 #define CONFIG_E500            1       /* BOOKE e500 family */
-#define CONFIG_MPC85xx         1       /* MPC8540/60/55/41/48/68 */
 #define CONFIG_MPC8569         1       /* MPC8569 specific */
 #define CONFIG_MPC8569MDS      1       /* MPC8569MDS board specific */
 
@@ -50,18 +51,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_L2_CACHE                                /* toggle L2 cache      */
 #define CONFIG_BTB                             /* toggle branch predition */
 
-#ifdef CONFIG_NAND
-#define CONFIG_NAND_U_BOOT             1
-#define CONFIG_RAMBOOT_NAND            1
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
-#else
-#define CONFIG_SYS_LDSCRIPT $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
-#define CONFIG_SYS_TEXT_BASE   0xf8f82000
-#endif
-#endif
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xfff80000
 #endif
@@ -98,7 +87,7 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 /* DDR Setup */
-#define CONFIG_FSL_DDR3
+#define CONFIG_SYS_FSL_DDR3
 #undef CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SPD_EEPROM              /* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_SPD
@@ -181,12 +170,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
 
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#else
 #undef CONFIG_SYS_RAMBOOT
-#endif
 
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
@@ -212,7 +196,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_NAND_BASE_PHYS      CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE, }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE   1
 #define CONFIG_CMD_NAND                        1
 #define CONFIG_NAND_FSL_ELBC           1
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -229,17 +212,10 @@ extern unsigned long get_clock_freq(void);
                                | OR_FCM_TRLX \
                                | OR_FCM_EHTR)
 
-#ifdef CONFIG_RAMBOOT_NAND
-#define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
-#define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM/* NAND Options */
-#define CONFIG_SYS_BR3_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
-#define CONFIG_SYS_OR3_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
-#else
 #define CONFIG_SYS_BR0_PRELIM  CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 #define CONFIG_SYS_OR0_PRELIM  CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 #define CONFIG_SYS_BR3_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 #define CONFIG_SYS_OR3_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#endif
 
 #define CONFIG_SYS_LBC_LCRR    0x00000004      /* LB clock ratio reg */
 #define CONFIG_SYS_LBC_LBCR    0x00040000      /* LB config reg */
@@ -259,7 +235,6 @@ extern unsigned long get_clock_freq(void);
 
 /* Serial Port */
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -273,16 +248,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser*/
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef  CONFIG_SYS_HUSH_PARSER
-#endif
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT               1
-#define CONFIG_OF_BOARD_SETUP          1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
 /*
  * I2C
  */
@@ -467,7 +432,6 @@ extern unsigned long get_clock_freq(void);
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#define CONFIG_E1000                   /* Define e1000 pci Ethernet card */
 
 #undef CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 
@@ -477,11 +441,6 @@ extern unsigned long get_clock_freq(void);
  * Environment
  */
 #if defined(CONFIG_SYS_RAMBOOT)
-#if defined(CONFIG_RAMBOOT_NAND)
-#define CONFIG_ENV_IS_IN_NAND  1
-#define CONFIG_ENV_SIZE                CONFIG_SYS_NAND_BLOCK_SIZE
-#define CONFIG_ENV_OFFSET      ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
-#endif
 #else
 #define CONFIG_ENV_IS_IN_FLASH 1
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
@@ -494,7 +453,7 @@ extern unsigned long get_clock_freq(void);
 
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xfff00000
+#define CONFIG_SYS_QE_FW_ADDR  0xfff00000
 
 /*
  * BOOTP options
@@ -508,14 +467,10 @@ extern unsigned long get_clock_freq(void);
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
@@ -545,7 +500,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMDLINE_EDITING                 /* Command-line editing */
 #define CONFIG_AUTO_COMPLETE                   /* add autocompletion support */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      2048            /* Console I/O Buffer Size */
 #else
@@ -556,7 +510,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MAXARGS     32              /* max number of command args */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
                                                /* Boot Argument Buffer Size */
-#define CONFIG_SYS_HZ  1000            /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -568,7 +521,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*