drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / MPC8572DS.h

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 71bd51b168050ce448aede4eb013affbcc6eaea2..d94f763002bf744fd3442ea74c3487160a21a2ed 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -11,15 +11,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
-
 #include "../board/freescale/common/ics307_clk.h"
 
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xeff40000
 #endif
@@ -40,10 +33,9 @@
 #define CONFIG_MP              1       /* support multiple processors */
 
 #define CONFIG_FSL_ELBC                1       /* Has Enhanced localbus controller */
-#define CONFIG_PCI             1       /* Enable PCI/PCIE */
-#define CONFIG_PCIE1           1       /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2           1       /* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3           1       /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1           1       /* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2           1       /* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3           1       /* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
 #define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
@@ -178,7 +170,6 @@
 #define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
 #endif
 
-
 #define CONFIG_FLASH_BR_PRELIM \
        (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
 #define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
@@ -319,7 +310,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_RELOC   (CONFIG_SYS_INIT_L2_END - 0x2000)
 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP        ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 
-
 /* NAND flash config */
 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
@@ -359,13 +349,11 @@
                               | BR_V)                 /* valid */
 #define CONFIG_SYS_OR6_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 
-
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -379,20 +367,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT               1
-#define CONFIG_OF_BOARD_SETUP          1
-#define CONFIG_OF_STDOUT_VIA_ALIAS     1
-
-/* new uImage format support */
-#define CONFIG_FIT             1
-#define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -487,16 +461,11 @@
 #define VIDEO_IO_OFFSET                CONFIG_SYS_PCIE1_IO_VIRT
 
 /* video */
-#define CONFIG_VIDEO
 
 #if defined(CONFIG_VIDEO)
 #define CONFIG_BIOSEMU
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
-/*#define CONFIG_CONSOLE_CURSOR*/
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 #endif
 
@@ -504,8 +473,6 @@
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
-#undef CONFIG_RTL8139
-#define CONFIG_E1000                   /* Define e1000 pci Ethernet card */
 
 #ifndef CONFIG_PCI_PNP
        #define PCI_ENET0_IOADDR        CONFIG_SYS_PCIE3_IO_BUS
@@ -528,7 +495,6 @@
 
 #endif /* CONFIG_PCI */
 
-
 #if defined(CONFIG_TSEC_ENET)
 
 #define CONFIG_MII             1       /* MII PHY management */
@@ -595,16 +561,11 @@
  */
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_EXT2
+#define CONFIG_SCSI
 #endif
 
 /*
@@ -613,10 +574,8 @@
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_USB_EHCI_PCI
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_STORAGE
 #define CONFIG_PCI_EHCI_DEVICE                 0
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     2
 #endif
@@ -675,7 +634,6 @@
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY 10    /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
 
 #define CONFIG_BAUDRATE        115200
@@ -698,7 +656,7 @@
 "consoledev=ttyS0\0"                           \
 "ramdiskaddr=2000000\0"                        \
 "ramdiskfile=8572ds/ramdisk.uboot\0"           \
-"fdtaddr=c00000\0"                             \
+"fdtaddr=1e00000\0"                            \
 "fdtfile=8572ds/mpc8572ds.dtb\0"               \
 "bdev=sda3\0"