drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / MPC8641HPCN.h

diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index f90f7f24a470bdee5d1e91eb5b1b7f654198de39..0461580ca49420c5760b3b770d17f5e30ad3cdfd 100644 (file)
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -16,14 +16,11 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_DISPLAY_BOARDINFO
-
 /* High Level Configuration Options */
 #define CONFIG_MPC8641         1       /* MPC8641 specific */
 #define CONFIG_MPC8641HPCN     1       /* MPC8641HPCN board specific */
 #define CONFIG_MP              1       /* support multiple processors */
 #define CONFIG_LINUX_RESET_VEC 0x100   /* Reset vector used by Linux */
-/*#define CONFIG_PHYS_64BIT    1*/     /* Place devices in 36-bit space */
 #define CONFIG_ADDR_MAP                1       /* Use addr map */
 
 /*
@@ -45,7 +42,6 @@
 #define CONFIG_SYS_SRIO
 #define CONFIG_SRIO1                   /* SRIO port 1 */
 
-#define CONFIG_PCI             1       /* Enable PCI/PCIE */
 #define CONFIG_PCIE1           1       /* PCIE controller 1 (ULI bridge) */
 #define CONFIG_PCIE2           1       /* PCIE controller 2 (slot) */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
@@ -364,8 +360,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  ************************************************************/
 #define CONFIG_PCI_OHCI                        1
 #define CONFIG_USB_OHCI_NEW            1
-#define CONFIG_USB_KEYBOARD            1
-#define CONFIG_SYS_STDIO_DEREGISTER
 #define CONFIG_SYS_USB_EVENT_POLL              1
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME          "ohci_pci"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     15
@@ -378,13 +372,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*#define VIDEO_IO_OFFSET      CONFIG_SYS_PCIE1_IO_VIRT*/
 
 /* video */
-#define CONFIG_VIDEO
 
 #if defined(CONFIG_VIDEO)
 #define CONFIG_BIOSEMU
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_ATI_RADEON_FB
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE2_IO_VIRT
@@ -637,7 +627,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (256 << 20)     /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN   (256 << 20)     /* Increase max gunzip size */
 
 #if defined(CONFIG_CMD_KGDB)
     #define CONFIG_KGDB_BAUDRATE       230400  /* speed to run kgdb serial port */
@@ -664,7 +655,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_NETMASK         255.255.255.0
 
 /* default location for tftp and bootm */
-#define CONFIG_LOADADDR                1000000
+#define CONFIG_LOADADDR                0x10000000
 
 #undef CONFIG_BOOTARGS         /* the boot command will set bootargs */
 
@@ -685,9 +676,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
                "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
                        " $filesize\0"  \
        "consoledev=ttyS0\0"                                            \
-       "ramdiskaddr=2000000\0"                                         \
+       "ramdiskaddr=0x18000000\0"                                              \
        "ramdiskfile=your.ramdisk.u-boot\0"                             \
-       "fdtaddr=c00000\0"                                              \
+       "fdtaddr=0x17c00000\0"                                          \
        "fdtfile=mpc8641_hpcn.dtb\0"                                    \
        "en-wd=mw.b ffdf0010 0x08; echo -expect:- 08; md.b ffdf0010 1\0"                        \
        "dis-wd=mw.b ffdf0010 0x00; echo -expect:- 00; md.b ffdf0010 1\0" \