Move CONFIG_OF_LIBFDT to Kconfig

[people/ms/u-boot.git] / include / configs / P1022DS.h

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 1470526d0bd3b8c92b8b3bd58437a9fba9cc278b..3aa10d1b43eb9f4265c1990b574dd9ebb91f55d4 100644 (file)
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -11,12 +11,13 @@
 
 #include "../board/freescale/common/ics307_clk.h"
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 #ifdef CONFIG_36BIT
 #define CONFIG_PHYS_64BIT
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -30,12 +31,12 @@
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
-#define CONFIG_SPL_PAD_TO              0x18000
-#define CONFIG_SPL_MAX_SIZE            (96 * 1024)
-#define CONFIG_SYS_MMC_U_BOOT_SIZE     (512 << 10)
+#define CONFIG_SPL_PAD_TO              0x20000
+#define CONFIG_SPL_MAX_SIZE            (128 * 1024)
+#define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x11000000)
 #define CONFIG_SYS_MMC_U_BOOT_START    (0x11000000)
-#define CONFIG_SYS_MMC_U_BOOT_OFFS     (96 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS     (128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #define CONFIG_SYS_LDSCRIPT            "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #define CONFIG_SPL_MMC_BOOT
@@ -45,7 +46,6 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -60,12 +60,12 @@
 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
-#define CONFIG_SPL_PAD_TO              0x18000
-#define CONFIG_SPL_MAX_SIZE            (96 * 1024)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (512 << 10)
+#define CONFIG_SPL_PAD_TO              0x20000
+#define CONFIG_SPL_MAX_SIZE            (128 * 1024)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x11000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x11000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (96 << 10)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (128 << 10)
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #define CONFIG_SPL_SPI_BOOT
@@ -75,10 +75,10 @@
 #endif
 
 #define CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_NAND_MAX_ECCPOS     56
+#define CONFIG_SYS_NAND_MAX_OOBFREE    5
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL
-#define CONFIG_TPL
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
@@ -94,7 +94,7 @@
 #define CONFIG_SPL_MAX_SIZE            (128 << 10)
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    (576 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    (832 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST     (0x11000000)
 #define CONFIG_SYS_NAND_U_BOOT_START   (0x11000000)
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    ((128 + 128) << 10)
@@ -120,13 +120,12 @@
 /* High Level Configuration Options */
 #define CONFIG_BOOKE                   /* BOOKE */
 #define CONFIG_E500                    /* BOOKE e500 family */
-#define CONFIG_MPC85xx                 /* MPC8540/60/55/41/48 */
 #define CONFIG_P1022
 #define CONFIG_P1022DS
 #define CONFIG_MP                      /* support multiple processors */
 
 #ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xeff80000
+#define CONFIG_SYS_TEXT_BASE   0xeff40000
 #endif
 
 #ifndef CONFIG_RESET_VECTOR_ADDRESS
@@ -177,7 +176,7 @@
 /* DDR Setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
-#define CONFIG_FSL_DDR3
+#define CONFIG_SYS_FSL_DDR3
 
 #ifdef CONFIG_DDR_ECC
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
@@ -290,7 +289,6 @@
 
 #define CONFIG_SYS_NAND_BASE_LIST      {CONFIG_SYS_NAND_BASE}
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND                        1
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (256 * 1024)
 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
@@ -351,7 +349,7 @@
        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
+#define CONFIG_SYS_MONITOR_LEN         (768 * 1024)
 #define CONFIG_SYS_MALLOC_LEN          (10 * 1024 * 1024)
 
 /*
@@ -364,10 +362,10 @@
 #define CONFIG_SYS_L2_SIZE             (256 << 10)
 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 #define CONFIG_SPL_RELOC_TEXT_BASE     0xf8f81000
-#define CONFIG_SPL_RELOC_STACK         (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
+#define CONFIG_SPL_RELOC_STACK         (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 #define CONFIG_SPL_RELOC_STACK_SIZE    (32 << 10)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE   (96 << 10)
+#define CONFIG_SPL_RELOC_MALLOC_ADDR   (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE   (108 << 10)
 #define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 #elif defined(CONFIG_NAND)
 #ifdef CONFIG_TPL_BUILD
@@ -395,7 +393,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -449,7 +446,6 @@
 /*
  * Pass open firmware flat tree
  */
-#define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
@@ -480,11 +476,8 @@
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
 
 #define CONFIG_HARD_SPI
-#define CONFIG_FSL_ESPI
 
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED                10000000
@@ -556,7 +549,6 @@
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
-#define CONFIG_E1000                   /* Define e1000 pci Ethernet card */
 #endif
 
 /* SATA */
@@ -618,6 +610,25 @@
 #define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 #endif
 
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#ifdef CONFIG_PHYS_64BIT
+#define MTDIDS_DEFAULT "nor0=fe8000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \
+                       "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
+                       "512k(dtb),768k(u-boot)"
+#else
+#define MTDIDS_DEFAULT "nor0=e8000000.nor"
+#define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \
+                       "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
+                       "512k(dtb),768k(u-boot)"
+#endif
+
 /*
  * Environment
  */
@@ -651,11 +662,7 @@
 #define CONFIG_ENV_SIZE                0x2000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
-#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
-#define CONFIG_ENV_ADDR        0xfff80000
-#else
 #define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-#endif
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 #endif
@@ -666,20 +673,15 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 #endif
 
 /*
@@ -725,7 +727,6 @@
 
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*