Convert CONFIG_VIDEO to Kconfig

[people/ms/u-boot.git] / include / configs / P1022DS.h

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 95c81ab4fbd4ec5305617c86f454cbc3189ebac1..e939dcb1a0249544d96176b836dd66741af84ca0 100644 (file)
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -11,24 +11,10 @@
 
 #include "../board/freescale/common/ics307_clk.h"
 
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
-
-#ifdef CONFIG_36BIT
-#define CONFIG_PHYS_64BIT
-#endif
-
 #ifdef CONFIG_SDCARD
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
@@ -47,17 +33,9 @@
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x11001000
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
@@ -83,14 +61,7 @@
 #ifdef CONFIG_TPL_BUILD
 #define CONFIG_SPL_NAND_BOOT
 #define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SPL_MAX_SIZE            (128 << 10)
 #define CONFIG_SPL_TEXT_BASE           0xf8f81000
@@ -101,8 +72,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    ((128 + 128) << 10)
 #elif defined(CONFIG_SPL_BUILD)
 #define CONFIG_SPL_INIT_MINIMAL
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TEXT_BASE           0xff800000
 #define CONFIG_SPL_MAX_SIZE            4096
@@ -135,9 +104,9 @@
 
 #define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
-#define CONFIG_PCIE1                   /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2                   /* PCIE controler 2 (slot 2) */
-#define CONFIG_PCIE3                   /* PCIE controler 3 (ULI bridge) */
+#define CONFIG_PCIE1                   /* PCIE controller 1 (slot 1) */
+#define CONFIG_PCIE2                   /* PCIE controller 2 (slot 2) */
+#define CONFIG_PCIE3                   /* PCIE controller 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET          /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
@@ -173,7 +142,6 @@
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
-
 /* DDR Setup */
 #define CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
@@ -218,7 +186,6 @@
 #define        CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 #define CONFIG_SYS_DDR_WRLVL_CONTROL   0x8675f608
 
-
 /*
  * Memory map
  *
@@ -394,7 +361,6 @@
  * Serial Port
  */
 #define CONFIG_CONS_INDEX              1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -408,14 +374,10 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
 /* Video */
 
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x10000)
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_SW_CURSOR
@@ -435,7 +397,6 @@
 
 #ifdef CONFIG_ATI
 #define VIDEO_IO_OFFSET                CONFIG_SYS_PCIE1_IO_VIRT
-#define CONFIG_VIDEO
 #define CONFIG_BIOSEMU
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_ATI_RADEON_FB
@@ -445,17 +406,6 @@
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #endif
 
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -479,12 +429,9 @@
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_SPI_FLASH_SPANSION
 
 #define CONFIG_HARD_SPI
-#define CONFIG_FSL_ESPI
 
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED                10000000
 #define CONFIG_SF_DEFAULT_MODE         0
 
@@ -573,20 +520,16 @@
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #define CONFIG_MMC
 #ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -680,9 +623,6 @@
  */
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -697,11 +637,8 @@
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
 #endif
 #endif
 
@@ -745,7 +682,6 @@
 
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE        115200
 
@@ -762,7 +698,7 @@
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=p1022ds.dtb\0"                                 \
        "bdev=sda3\0"                                           \
        "hwconfig=esdhc;audclk:12\0"