configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / P1023RDB.h

diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index b41cb4a13efff2291d163f0befaf973997e762a7..833affdac561f29bf3cc20cdf68875ce723db88d 100644 (file)
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -10,6 +10,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_DISPLAY_BOARDINFO
+
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE   0xeff40000
 #endif
@@ -125,7 +127,7 @@ extern unsigned long get_clock_freq(void);
                                        GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)      /* Reserve 512 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)      /* Reserve 512 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN  (6 * 1024 * 1024) /* Reserved for malloc */
 
 #define CONFIG_SYS_NAND_BASE           0xffa00000
@@ -133,7 +135,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
@@ -161,7 +162,6 @@ extern unsigned long get_clock_freq(void);
 /* Serial Port */
 #define CONFIG_CONS_INDEX              1
 #undef CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -172,20 +172,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR + 0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR + 0x4600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Pass open firmware flat tree
- */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -248,7 +234,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
 #if defined(CONFIG_PCI)
-#define CONFIG_E1000           /* Defind e1000 pci Ethernet card */
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif /* CONFIG_PCI */
@@ -269,17 +254,13 @@ extern unsigned long get_clock_freq(void);
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_REGINFO
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
 #endif
 
 /*
@@ -344,9 +325,25 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_QMAN_MEM_BASE       0xff000000
 #define CONFIG_SYS_QMAN_MEM_PHYS       CONFIG_SYS_QMAN_MEM_BASE
 #define CONFIG_SYS_QMAN_MEM_SIZE       0x00200000
+#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
+#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
+#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
+#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
+                                       CONFIG_SYS_QMAN_CENA_SIZE)
+#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_QMAN_SWP_ISDR_REG   0xE08
 #define CONFIG_SYS_BMAN_MEM_BASE       0xff200000
 #define CONFIG_SYS_BMAN_MEM_PHYS       CONFIG_SYS_BMAN_MEM_BASE
 #define CONFIG_SYS_BMAN_MEM_SIZE       0x00200000
+#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
+#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
+#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
+#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
+                                       CONFIG_SYS_BMAN_CENA_SIZE)
+#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
+#define CONFIG_SYS_BMAN_SWP_ISDR_REG   0xE08
 
 /* For FM */
 #define CONFIG_SYS_DPAA_FMAN
@@ -360,7 +357,7 @@ extern unsigned long get_clock_freq(void);
 /* Default address of microcode for the Linux Fman driver */
 /* QE microcode/firmware address */
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
-#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xEFF00000
+#define CONFIG_SYS_FMAN_FW_ADDR        0xEFF00000
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
@@ -374,6 +371,49 @@ extern unsigned long get_clock_freq(void);
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS      \
+       "netdev=eth0\0"                                         \
+       "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
+       "loadaddr=1000000\0"                                    \
+       "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
+       "tftpflash=tftpboot $loadaddr $uboot; "                 \
+               "protect off $ubootaddr +$filesize; "           \
+               "erase $ubootaddr +$filesize; "                 \
+               "cp.b $loadaddr $ubootaddr $filesize; "         \
+               "protect on $ubootaddr +$filesize; "            \
+               "cmp.b $loadaddr $ubootaddr $filesize\0"        \
+       "consoledev=ttyS0\0"                                    \
+       "ramdiskaddr=2000000\0"                                 \
+       "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
+       "fdtaddr=c00000\0"                                      \
+       "fdtfile=p1023rdb.dtb\0"                                \
+       "othbootargs=ramdisk_size=600000\0"                     \
+       "bdev=sda1\0"                                           \
        "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
 
+#define CONFIG_HDBOOT                                  \
+       "setenv bootargs root=/dev/$bdev rw "           \
+       "console=$consoledev,$baudrate $othbootargs;"   \
+       "tftp $loadaddr $bootfile;"                     \
+       "tftp $fdtaddr $fdtfile;"                       \
+       "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_NFSBOOTCOMMAND                                          \
+       "setenv bootargs root=/dev/nfs rw "                             \
+       "nfsroot=$serverip:$rootpath "                                  \
+       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+       "console=$consoledev,$baudrate $othbootargs;"                   \
+       "tftp $loadaddr $bootfile;"                                     \
+       "tftp $fdtaddr $fdtfile;"                                       \
+       "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND                                          \
+       "setenv bootargs root=/dev/ram rw "                             \
+       "console=$consoledev,$baudrate $othbootargs;"                   \
+       "tftp $ramdiskaddr $ramdiskfile;"                               \
+       "tftp $loadaddr $bootfile;"                                     \
+       "tftp $fdtaddr $fdtfile;"                                       \
+       "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND             CONFIG_RAMBOOTCOMMAND
+
 #endif /* __CONFIG_H */