Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / P1023RDB.h

diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index 1ae147166ca3015c1ad498277ce9587826e43b7d..8dbfb06343e3aa74b49652b8d73d916a9c06913f 100644 (file)
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -10,10 +10,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE   0xeff40000
-#endif
-
 #ifndef CONFIG_SYS_MONITOR_BASE
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #endif
@@ -23,13 +19,8 @@
 #endif
 
 /* High Level Configuration Options */
-#define CONFIG_BOOKE           /* BOOKE */
-#define CONFIG_E500            /* BOOKE e500 family */
-#define CONFIG_P1023
 #define CONFIG_MP              /* support multiple processors */
 
-#define CONFIG_FSL_ELBC                /* Has Enhanced localbus controller */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCIE1           /* PCIE controller 1 (slot 1) */
 #define CONFIG_PCIE2           /* PCIE controller 2 (slot 2) */
@@ -37,7 +28,6 @@
 #define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET  /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   /* enable 64-bit PCI resources */
-#define CONFIG_FSL_LAW         /* Use common FSL init code */
 
 #ifndef __ASSEMBLY__
 extern unsigned long get_clock_freq(void);
@@ -58,8 +48,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MEMTEST_START       0x01000000      /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x02000000
 
-#define CONFIG_PANIC_HANG      /* do not reset board on panic */
-
 /* Implement conversion of addresses in the LBC */
 #define CONFIG_SYS_LBC_LBCR            0x00000000
 #define CONFIG_SYS_LBC_LCRR            LCRR_CLKDIV_8
@@ -73,7 +61,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CHIP_SELECTS_PER_CTRL   1
 
 #define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR3
 #define CONFIG_FSL_DDR_INTERACTIVE
 #define CONFIG_SYS_SDRAM_SIZE          512u    /* DDR is 512M */
 #define CONFIG_SYS_SPD_BUS_NUM          0
@@ -115,7 +102,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_FLASH_ERASE_TOUT    60000   /* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (ms) */
 
-#define CONFIG_BOARD_EARLY_INIT_F      /* call board_early_init_f function */
 #define CONFIG_BOARD_EARLY_INIT_R      /* call board_early_init_r function */
 
 #define CONFIG_SYS_INIT_RAM_LOCK
@@ -133,7 +119,6 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_SYS_NAND_BASE_LIST      { CONFIG_SYS_NAND_BASE }
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_CMD_NAND
 #define CONFIG_NAND_FSL_ELBC
 #define CONFIG_SYS_NAND_BLOCK_SIZE     (128 * 1024)
 
@@ -230,7 +215,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_PCIE1_IO_SIZE       0x00010000      /* 64k */
 
 #if defined(CONFIG_PCI)
-#define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif /* CONFIG_PCI */
 
@@ -239,7 +223,6 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_ENV_OVERWRITE
 
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
@@ -247,46 +230,21 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_LOADS_ECHO              /* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-#define CONFIG_CMD_PCI
-#endif
-
 /*
  * USB
  */
 #define CONFIG_HAS_FSL_DR_USB
 #ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI
-
-#ifdef CONFIG_USB_EHCI
+#ifdef CONFIG_USB_EHCI_HCD
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_USB_EHCI_FSL
-#define CONFIG_DOS_PARTITION
 #endif
 #endif
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING         /* Command-line editing */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-#endif
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
 /*
  * For booting Linux, the board info and command line data
@@ -305,11 +263,7 @@ extern unsigned long get_clock_freq(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-
-#define CONFIG_BAUDRATE        115200
-
 /* Qman/Bman */
-#define CONFIG_SYS_DPAA_QBMAN          /* support Q/Bman */
 #define CONFIG_SYS_QMAN_MEM_BASE       0xff000000
 #define CONFIG_SYS_QMAN_MEM_PHYS       CONFIG_SYS_QMAN_MEM_BASE
 #define CONFIG_SYS_QMAN_MEM_SIZE       0x00200000
@@ -335,7 +289,6 @@ extern unsigned long get_clock_freq(void);
 
 /* For FM */
 #define CONFIG_SYS_DPAA_FMAN
-#define CONFIG_PHY_GIGE                /* Include GbE speed/duplex detection */
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 #define CONFIG_FMAN_ENET