drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / P2041RDB.h

diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index f250e7f88ec60266aca8dc1e1031a69419d35305..0edbb6f7810d06d6ea5700ae9090c6decc4b8cfa 100644 (file)
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -12,8 +12,6 @@
 #define __CONFIG_H
 
 #define CONFIG_P2041RDB
-#define CONFIG_PHYS_64BIT
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_PPC_P2041
 
 #ifdef CONFIG_RAMBOOT_PBL
@@ -51,10 +49,9 @@
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_ELBC                        /* Has Enhanced localbus controller */
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
-#define CONFIG_PCIE1                   /* PCIE controler 1 */
-#define CONFIG_PCIE2                   /* PCIE controler 2 */
-#define CONFIG_PCIE3                   /* PCIE controler 3 */
+#define CONFIG_PCIE1                   /* PCIE controller 1 */
+#define CONFIG_PCIE2                   /* PCIE controller 2 */
+#define CONFIG_PCIE3                   /* PCIE controller 3 */
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
 
@@ -336,18 +333,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_NS16550_COM3        (CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -409,7 +394,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
@@ -581,7 +565,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -613,13 +596,8 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
@@ -632,25 +610,18 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_HAS_FSL_MPH_USB
 
 #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
 
-#define CONFIG_CMD_EXT2
-
 #define CONFIG_MMC
 
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -701,7 +672,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE        115200
 
@@ -724,7 +694,7 @@ unsigned long get_board_sys_clk(unsigned long dummy);
        "usb_dr_mode=host\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
        "bdev=sda3\0"