Convert CONFIG_CMD_EEPROM et al to Kconfig

[people/ms/u-boot.git] / include / configs / PATI.h

diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index 3ca204e1e2e4676a7b71d31520171e11fcb94a04..1b2cb3dd228cdfb2af3d98d60ef6fac518fbb149 100644 (file)
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -21,15 +21,10 @@
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF00000
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* Serial Console Configuration */
 #define        CONFIG_5xx_CONS_SCI1
 #undef CONFIG_5xx_CONS_SCI2
 
-#define CONFIG_BAUDRATE                9600
-
-
 /*
  * BOOTP options
  */
@@ -38,50 +33,27 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_LOADB
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_SAVEENV
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CONSOLE
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MISC
 
-
-#if 0
-#define CONFIG_BOOTDELAY       -1              /* autoboot disabled                    */
-#else
-#define CONFIG_BOOTDELAY       5               /* autoboot after 5 seconds             */
-#endif
 #define CONFIG_BOOTCOMMAND     ""      /* autoboot command                     */
 
 #define CONFIG_BOOTARGS                ""              /* */
 
 #define CONFIG_WATCHDOG                                /* turn on platform specific watchdog   */
 
-/*#define CONFIG_STATUS_LED    1               */ /* Enable status led */
-
 #define CONFIG_LOADS_ECHO      1               /* Echo on for serial download */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* stdin, stdout and stderr are in evironment */
 #define CONFIG_PREBOOT
 
 #define        CONFIG_SYS_LONGHELP                             /* undef to save memory         */
-#define        CONFIG_SYS_PROMPT               "pati=> "               /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define        CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size      */
 #else
@@ -98,8 +70,6 @@
 
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 1250000 }
 
-#define CONFIG_BOARD_EARLY_INIT_F
-
 /***********************************************************************
  * Last Stage Init
  ***********************************************************************/
@@ -147,7 +117,6 @@
  */
 #define        CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux         */
 
-
 /*-----------------------------------------------------------------------
  * FLASH organization
  *-----------------------------------------------------------------------
@@ -177,7 +146,6 @@
 #define CONFIG_ENV_OFFSET              ((0 - CONFIG_SYS_FLASH_BASE) - CONFIG_ENV_SIZE)         /* Environment starts at this adress    */
 #endif
 
-
 #define CONFIG_SPI             1
 #define CONFIG_SYS_SPI_CS_USED 0x09 /* CS0 and CS3 are used */
 #define CONFIG_SYS_SPI_CS_BASE 0x08 /* CS3 is active low */
@@ -236,7 +204,6 @@
  */
 #define CONFIG_SYS_OSC_CLK     ((uint)4000000)         /* Oscillator clock is 4MHz     */
 
-
 #define CONFIG_SYS_PLPRCR      (PLPRCR_MF_9 | PLPRCR_DIVF_0)
 
 /*-----------------------------------------------------------------------
@@ -276,9 +243,4 @@
  */
 #define CONFIG_SYS_DER                 0x00000000
 
-#define VERSION_TAG "released"
-#define CONFIG_ISO_STRING "MEV-10084-001"
-
-#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
-
 #endif /* __CONFIG_H */