drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / PIP405.h

diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 5d639b187561f6e54d07fb04fbedea5a26bd008d..7362d2b0df58baa5e40c4c0802942b3bc089bddd 100644 (file)
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -21,13 +21,11 @@
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF80000
 
-
 /***********************************************************
  * Clock
  ***********************************************************/
 #define CONFIG_SYS_CLK_FREQ    33000000 /* external frequency to pll   */
 
-
 /*
  * BOOTP options
  */
@@ -36,26 +34,18 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_FDC
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
+#define CONFIG_SCSI
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_BSP
 
@@ -85,7 +75,6 @@
                                        /* last 6 bits of the address   */
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10      /* and takes up to 10 msec */
 
-
 /***************************************************************
  * Definitions for Serial Presence Detect EEPROM address
  * (to get SDRAM settings)
@@ -100,12 +89,8 @@
  **************************************************************/
 #define CONFIG_BAUDRATE                9600    /* STD Baudrate */
 
-
-#define CONFIG_BOOTDELAY       5
 /* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
 /* #define CONFIG_BOOT_RETRY_TIME      -10     /XXX* feature is available but not enabled */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check console even if bootdelay = 0 */
-
 
 #define CONFIG_BOOTCOMMAND     "diskboot 400000 0:1; bootm" /* autoboot command                */
 #define CONFIG_BOOTARGS                "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
@@ -113,20 +98,13 @@
 #define CONFIG_IPADDR          10.0.0.100
 #define CONFIG_SERVERIP                10.0.0.1
 #define CONFIG_PREBOOT
-/***************************************************************
- * defines if the console is stored in the environment
- ***************************************************************/
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* stdin, stdout and stderr are in evironment */
 /***************************************************************
  * defines if an overwrite_console function exists
  *************************************************************/
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
 /***************************************************************
  * defines if the overwrite_console should be stored in the
  * environment
  **************************************************************/
-#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
 
 /**************************************************************
  * loads config
@@ -175,7 +153,6 @@
 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
-#define CONFIG_PCI                     /* include pci support          */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host        */
 #define CONFIG_PCI_PNP                 /* pci plug-and-play            */
@@ -235,7 +212,6 @@
 #define CONFIG_PORT_ADDR       0xF4000000
 #define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
 
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in On Chip SRAM)
  */
@@ -319,24 +295,15 @@
 /************************************************************
  * Video support
  ************************************************************/
-#define CONFIG_VIDEO                   /*To enable video controller support */
-#define CONFIG_VIDEO_CT69000
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VIDEO_ONBOARD           /* Video controller is on-board */
 
 /************************************************************
  * USB support
  ************************************************************/
 #define CONFIG_USB_UHCI
-#define CONFIG_USB_KEYBOARD
-#define CONFIG_USB_STORAGE
 
 /* Enable needed helper functions */
-#define CONFIG_SYS_STDIO_DEREGISTER            /* needs stdio_deregister */
 
 /************************************************************
  * Debug support
@@ -350,12 +317,4 @@
  ************************************************************/
 #define CONFIG_BZIP2           1
 
-/************************************************************
- * Ident
- ************************************************************/
-#define VERSION_TAG "released"
-#define CONFIG_ISO_STRING "MEV-10066-001"
-#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
-
-
 #endif /* __CONFIG_H */