kconfig: introduce kconfig for UBI

[people/ms/u-boot.git] / include / configs / PLU405.h

diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index a236e117a03bc2209c3967c8f30ef87bf6aeb5e0..53e51e51352e1575f8c747a0376bc54fe0ef3bcb 100644 (file)
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -21,7 +21,6 @@
 #define CONFIG_PLU405          1       /* ...on a PLU405 board         */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF80000
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
@@ -48,7 +47,6 @@
 
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
-
 /*
  * BOOTP options
  */
@@ -57,28 +55,15 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_USB
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -97,8 +82,6 @@
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
 
-#undef CONFIG_SYS_HUSH_PARSER                  /* use "hush" command parser    */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
@@ -118,7 +101,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 
 #define CONFIG_CONS_INDEX      1       /* Use UART0                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
@@ -135,19 +117,6 @@
 #define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds     */
-
-/* Only interrupt boot if space is pressed */
-/* If a long serial cable is connected but */
-/* other end is dead, garbage will be read */
-#define CONFIG_AUTOBOOT_KEYED  1
-#define CONFIG_AUTOBOOT_PROMPT \
-       "Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
-#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
 
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
 
@@ -401,12 +370,10 @@
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "ohci_pci"
-#define CONFIG_USB_STORAGE     1
 
 /*
  * UBI
  */
-#define CONFIG_CMD_UBI
 #define CONFIG_RBTREE
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS