drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / PLU405.h

diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 4eb5fe1c61f7850b3c3a37a99c136d7a4841a6e3..5ef14a1d6ba9bf2a75e2f6bafc320604a0d36c8f 100644 (file)
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -21,7 +21,6 @@
 #define CONFIG_PLU405          1       /* ...on a PLU405 board         */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFF80000
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 #define CONFIG_MISC_INIT_R     1       /* call misc_init_r()           */
@@ -47,7 +46,6 @@
 
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
-
 /*
  * BOOTP options
  */
@@ -56,25 +54,15 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_USB
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -93,8 +81,6 @@
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
 
-#undef CONFIG_SYS_HUSH_PARSER                  /* use "hush" command parser    */
-
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
 #else
@@ -106,8 +92,6 @@
 
 #define CONFIG_SYS_DEVICE_NULLDEV      1       /* include nulldev device       */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  1       /* don't print console @ startup*/
-
 #define CONFIG_AUTO_COMPLETE   1       /* add autocompletion support   */
 
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
@@ -130,10 +114,6 @@
 #define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds     */
-
-#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
 
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */
 
@@ -159,7 +139,6 @@
 #define PCI_HOST_FORCE  1               /* configure as pci host        */
 #define PCI_HOST_AUTO   2               /* detected via arbiter enable  */
 
-#define CONFIG_PCI                     /* include pci support          */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST        PCI_HOST_FORCE  /* select pci host function     */
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play         */
@@ -387,12 +366,10 @@
 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME  "ohci_pci"
-#define CONFIG_USB_STORAGE     1
 
 /*
  * UBI
  */
-#define CONFIG_CMD_UBI
 #define CONFIG_RBTREE
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS