Convert CONFIG_CMD_EEPROM et al to Kconfig

[people/ms/u-boot.git] / include / configs / PMC405DE.h

diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index a64c82a27291d44ad27cdbc3ca6f8343bc91b5aa..2f05a5a17668eb6d9e1b242da9d09210e3c62627 100644 (file)
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -12,18 +12,12 @@
 #define CONFIG_PMC405DE                1       /* ...on a PMC405DE board       */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
 
-#define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 #define CONFIG_MISC_INIT_R     1       /* call misc_init_r()           */
 #define CONFIG_BOARD_TYPES     1       /* support board types          */
 
 #define CONFIG_SYS_CLK_FREQ    33330000 /* external frequency to pll   */
 
-#define CONFIG_BAUDRATE                115200
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds     */
-
 #undef  CONFIG_BOOTARGS
 #undef  CONFIG_BOOTCOMMAND
 
@@ -54,23 +48,8 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CHIP_CONFIG
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 
 #undef  CONFIG_WATCHDOG                        /* watchdog disabled */
 #define CONFIG_SDRAM_BANK0     1       /* init onboard SDRAM bank 0 */
@@ -87,13 +66,11 @@
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 
 #define CONFIG_SYS_DEVICE_NULLDEV      1       /* include nulldev device */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  1       /* don't print console info */
 
 #define CONFIG_SYS_MEMTEST_START       0x0100000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END         0x3000000 /* 1 ... 48 MB in DRAM */
 
 #define CONFIG_CONS_INDEX      2       /* Use UART1                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
@@ -105,10 +82,7 @@
 #define CONFIG_SYS_EXTBDINFO   1       /* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_LOOPW           1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC       1       /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
 
 /*
  * PCI stuff
@@ -117,10 +91,8 @@
 #define PCI_HOST_FORCE         1       /* configure as pci host        */
 #define PCI_HOST_AUTO          2       /* detected via arbiter enable  */
 
-#define CONFIG_PCI             /* include pci support                  */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST        PCI_HOST_AUTO  /* select pci host function      */
-#define CONFIG_PCI_PNP         /* do (not) pci plug-and-play           */
 
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup          */
 
@@ -171,7 +143,6 @@
 #define CONFIG_SYS_FLASH_EMPTY_INFO    1 /* 'E' for empty sector (flinfo) */
 #define CONFIG_SYS_FLASH_QUIET_TEST    1 /* don't warn upon unknown flash */
 
-
 /*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)