ns16550: move CONFIG_SYS_NS16550 to Kconfig

[people/ms/u-boot.git] / include / configs / PMC405DE.h

diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
index 83cee9654939fbd05095b9618efbfbbcc053d2c4..ce0c49f663835080c84253d544b5da43446346ea 100644 (file)
--- a/include/configs/PMC405DE.h
+++ b/include/configs/PMC405DE.h
@@ -2,33 +2,17 @@
  * (C) Copyright 2009
  * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #define CONFIG_405EP           1       /* This is a PPC405 CPU         */
-#define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_PMC405DE                1       /* ...on a PMC405DE board       */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFFC0000
+#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 #define CONFIG_MISC_INIT_R     1       /* call misc_init_r()           */
@@ -46,7 +30,6 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change*/
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1
 
 #define CONFIG_PPC4xx_EMAC
@@ -70,18 +53,14 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
 
@@ -96,7 +75,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT      "=> "   /* Monitor Command Prompt */
 
 #define CONFIG_SYS_CBSIZE      256     /* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -110,7 +88,6 @@
 #define CONFIG_SYS_MEMTEST_END         0x3000000 /* 1 ... 48 MB in DRAM */
 
 #define CONFIG_CONS_INDEX      2       /* Use UART1                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
@@ -118,27 +95,15 @@
 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK
 #define CONFIG_SYS_BASE_BAUD           691200
 
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      \
-       { 9600, 19200, 38400, 57600, 115200 }
-
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_EXTBDINFO   1       /* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_LOOPW           1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC       1       /* enable mdc/mwc commands      */
 #define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
 #define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
 
-#define CONFIG_AUTOBOOT_KEYED  1
-#define CONFIG_AUTOBOOT_PROMPT \
-       "Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
 /*
  * PCI stuff
  */
@@ -147,6 +112,7 @@
 #define PCI_HOST_AUTO          2       /* detected via arbiter enable  */
 
 #define CONFIG_PCI             /* include pci support                  */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_HOST        PCI_HOST_AUTO  /* select pci host function      */
 #define CONFIG_PCI_PNP         /* do (not) pci plug-and-play           */
 
@@ -221,10 +187,11 @@
 /*
  * I2C EEPROM (24W16) for environment
  */
-#define CONFIG_HARD_I2C                        /* I2c with hardware support */
-#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
-#define CONFIG_SYS_I2C_SPEED           400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50    /* EEPROM 24W16 */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1       /* Bytes of address */