Convert CONFIG_CMD_BSP to Kconfig

[people/ms/u-boot.git] / include / configs / PMC440.h

diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index c29429d368a6e96014f3a6accf6185678ac62822..31e95c1b65b4a9f0819ed8c84471a3c9bfcf9aa3 100644 (file)
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -29,16 +29,12 @@
 #define CONFIG_SYS_TEXT_BASE   0xFFF90000
 #endif
 
-#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DISPLAY_BOARDINFO
-
 #define CONFIG_SYS_CLK_FREQ    33333400
 
 #if 0 /* temporary disabled because OS/9 does not like dcache on startup */
 #define CONFIG_4xx_DCACHE              /* enable dcache        */
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F 1    /* Call board_early_init_f */
 #define CONFIG_MISC_INIT_F     1
 #define CONFIG_MISC_INIT_R     1       /* Call misc_init_r     */
 #define CONFIG_BOARD_TYPES     1       /* support board types  */
@@ -85,12 +81,10 @@
  * Serial Port
  *----------------------------------------------------------------------*/
 #define CONFIG_CONS_INDEX      1       /* Use UART0                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
-#define CONFIG_BAUDRATE                115200
 
 #define CONFIG_SYS_BAUDRATE_TABLE                                              \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -160,8 +154,6 @@
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_1          400000
 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_1          0x7F
 
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-
 #define CONFIG_SYS_I2C_EEPROM_ADDR             0x54
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN         2
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS      5
@@ -233,7 +225,6 @@
                "cp.b 200000 fff90000 70000\0"                          \
        ""
 
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds     */
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
@@ -254,7 +245,6 @@
 
 /* USB */
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 
 #define CONFIG_SYS_USB_OHCI_BOARD_INIT 1
@@ -267,27 +257,12 @@
 #define USB_2_0_DEVICE
 
 /* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BSP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
 
 /* POST support */
@@ -303,8 +278,6 @@
 #define CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR     0x7fff0000      /* free virtual address     */
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* Otherwise it catches logbuffer as output */
-
 #define CONFIG_SUPPORT_VFAT
 
 /*-----------------------------------------------------------------------
@@ -327,24 +300,13 @@
 #define CONFIG_SYS_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_LOOPW           1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC       1       /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
-
-#define CONFIG_AUTOBOOT_KEYED  1
-#define CONFIG_AUTOBOOT_PROMPT \
-       "Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define CONFIG_AUTOBOOT_STOP_STR " "
 
 /*-----------------------------------------------------------------------
  * PCI stuff
  *----------------------------------------------------------------------*/
 /* General PCI */
-#define CONFIG_PCI             /* include pci support          */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP         /* do (not) pci plug-and-play   */
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0       /* to avoid problems with PNP   */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup  */
 #define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
@@ -416,16 +378,9 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
 #define CONFIG_SYS_NAND_SELECT_DEVICE  1 /* nand driver supports mutipl. chips */
-#define CONFIG_SYS_NAND_QUIET_TEST     1
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-
-#define CONFIG_API             1
-
 #endif /* __CONFIG_H */