Convert CONFIG_CMD_EEPROM et al to Kconfig

[people/ms/u-boot.git] / include / configs / PMC440.h

diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index b765facef54e1cc6deb99b9c043dc8ae600b2d6a..54a1a2546fbebfa1df34a37f8c1474430fda2b8c 100644 (file)
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -35,7 +35,6 @@
 #define CONFIG_4xx_DCACHE              /* enable dcache        */
 #endif
 
-#define CONFIG_BOARD_EARLY_INIT_F 1    /* Call board_early_init_f */
 #define CONFIG_MISC_INIT_F     1
 #define CONFIG_MISC_INIT_R     1       /* Call misc_init_r     */
 #define CONFIG_BOARD_TYPES     1       /* support board types  */
@@ -86,7 +85,6 @@
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
-#define CONFIG_BAUDRATE                115200
 
 #define CONFIG_SYS_BAUDRATE_TABLE                                              \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
@@ -165,26 +163,6 @@
 #define CONFIG_SYS_EEPROM_WREN                 1
 #define CONFIG_SYS_I2C_BOOT_EEPROM_ADDR        0x52
 
-/*
- * standard dtt sensor configuration - bottom bit will determine local or
- * remote sensor of the TMP401
- */
-#define CONFIG_DTT_SENSORS             { 0, 1 }
-
-/*
- * The PMC440 uses a TI TMP401 temperature sensor. This part
- * is basically compatible to the ADM1021 that is supported
- * by U-Boot.
- *
- * - i2c addr 0x4c
- * - conversion rate 0x02 = 0.25 conversions/second
- * - ALERT ouput disabled
- * - local temp sensor enabled, min set to 0 deg, max set to 70 deg
- * - remote temp sensor enabled, min set to 0 deg, max set to 70 deg
- */
-#define CONFIG_DTT_ADM1021
-#define CONFIG_SYS_DTT_ADM1021         { { 0x4c, 0x02, 0, 1, 70, 0, 1, 70, 0} }
-
 #define CONFIG_PREBOOT         "echo Add \\\"run fpga\\\" and "        \
                                "\\\"painit\\\" to preboot command"
 
@@ -259,14 +237,7 @@
 #define USB_2_0_DEVICE
 
 /* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
+
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_REGINFO
@@ -284,8 +255,6 @@
 #define CONFIG_LOGBUFFER
 #define CONFIG_SYS_POST_CACHE_ADDR     0x7fff0000      /* free virtual address     */
 
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* Otherwise it catches logbuffer as output */
-
 #define CONFIG_SUPPORT_VFAT
 
 /*-----------------------------------------------------------------------
@@ -314,9 +283,7 @@
  * PCI stuff
  *----------------------------------------------------------------------*/
 /* General PCI */
-#define CONFIG_PCI             /* include pci support          */
 #define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
-#define CONFIG_PCI_PNP         /* do (not) pci plug-and-play   */
 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0       /* to avoid problems with PNP   */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup  */
 #define CONFIG_SYS_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
@@ -393,6 +360,4 @@
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #endif
 
-#define CONFIG_API             1
-
 #endif /* __CONFIG_H */