Convert CONFIG_VIDEO to Kconfig

[people/ms/u-boot.git] / include / configs / T102xQDS.h

diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index 2f18f5227b031362dd431f0561797720dcab78ae..3723322d5307f9cb8254f97b7e920b5277324d7d 100644 (file)
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -12,7 +12,6 @@
 #define __T1024QDS_H
 
 /* High Level Configuration Options */
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_BOOKE
 #define CONFIG_E500                    /* BOOKE e500 family */
 #define CONFIG_E500MC                  /* BOOKE e500mc family */
@@ -34,7 +33,6 @@
 
 #define CONFIG_DEEP_SLEEP
 #if defined(CONFIG_DEEP_SLEEP)
-#define CONFIG_SILENT_CONSOLE
 #define CONFIG_BOARD_EARLY_INIT_F
 #endif
 
@@ -42,16 +40,8 @@
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
@@ -67,19 +57,17 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RESET_VECTOR_ADDRESS            0x200FFC
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
@@ -89,12 +77,12 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg
 #define CONFIG_SPL_SPI_BOOT
 #endif
 
 #ifdef CONFIG_SDCARD
 #define CONFIG_RESET_VECTOR_ADDRESS            0x200FFC
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x00200000)
@@ -104,6 +92,7 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg
 #define CONFIG_SPL_MMC_BOOT
 #endif
 
@@ -514,7 +503,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_SW_CURSOR
@@ -675,7 +663,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif