drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / T102xQDS.h

diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index dcfaa66a3c837d4adb3e0008ec9378406bd20c34..7417ff4d31218c45d2d65615ba3d75a0a483ffec 100644 (file)
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -12,7 +12,6 @@
 #define __T1024QDS_H
 
 /* High Level Configuration Options */
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_BOOKE
 #define CONFIG_E500                    /* BOOKE e500 family */
 #define CONFIG_E500MC                  /* BOOKE e500mc family */
@@ -34,7 +33,6 @@
 
 #define CONFIG_DEEP_SLEEP
 #if defined(CONFIG_DEEP_SLEEP)
-#define CONFIG_SILENT_CONSOLE
 #define CONFIG_BOARD_EARLY_INIT_F
 #endif
 
@@ -42,8 +40,6 @@
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
@@ -66,13 +62,12 @@
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_nand_rcw.cfg
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RESET_VECTOR_ADDRESS            0x200FFC
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
@@ -82,6 +77,7 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_spi_rcw.cfg
 #define CONFIG_SPL_SPI_BOOT
 #endif
 
@@ -96,6 +92,7 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_sd_rcw.cfg
 #define CONFIG_SPL_MMC_BOOT
 #endif
 
@@ -498,7 +495,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x11C600)
 #define CONFIG_SYS_NS16550_COM3        (CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
 /* Video */
 #ifdef CONFIG_PPC_T1024                /* no DIU on T1023 */
@@ -506,11 +502,7 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
@@ -567,7 +559,6 @@ unsigned long get_board_ddr_clk(void);
  * General PCIe
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
 #define CONFIG_PCIE1           /* PCIE controller 1 */
 #define CONFIG_PCIE2           /* PCIE controller 2 */
 #define CONFIG_PCIE3           /* PCIE controller 3 */