configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS

[people/ms/u-boot.git] / include / configs / T102xQDS.h

diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index fcaa803c4e8badb12ad7fade233dcff7906bc8e8..cbd92d92f6b4e6acb245b5fa15698a370afeea66 100644 (file)
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -28,8 +28,6 @@
 
 #define CONFIG_DEEP_SLEEP
 
-#define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
-
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
 #define CONFIG_SPL_FLUSH_IMAGE
@@ -44,7 +42,6 @@
 #define CONFIG_SPL_SKIP_RELOCATE
 #define CONFIG_SPL_COMMON_INIT_DDR
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #ifdef CONFIG_NAND
@@ -97,7 +94,7 @@
 #define CONFIG_RESET_VECTOR_ADDRESS    0xeffffffc
 #endif
 
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
@@ -144,7 +141,6 @@
 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS       \
                (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
-#define CONFIG_SYS_NO_FLASH
 #endif
 
 #if defined(CONFIG_SPIFLASH)
@@ -490,7 +486,6 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_CMD_BMP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
@@ -633,7 +628,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_SATA1               CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS         FLAGS_DMA
 #define CONFIG_LBA48
-#define CONFIG_CMD_SATA
 #endif
 
 /*
@@ -642,7 +636,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_HAS_FSL_DR_USB
 
 #ifdef CONFIG_HAS_FSL_DR_USB
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
@@ -762,10 +755,9 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Dynamic MTD Partition support with mtdparts
  */
-#ifndef CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
 #define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT    "nor0=fe8000000.nor,nand0=fff800000.flash," \
                          "spi0=spife110000.0"
@@ -785,10 +777,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -830,7 +818,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       "u-boot.bin" /* U-Boot image on TFTP server */
 #define CONFIG_LOADADDR                1000000 /* default location for tftp, bootm */
-#define CONFIG_BAUDRATE                115200
 #define __USB_PHY_TYPE         utmi
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
@@ -873,12 +860,6 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTCOMMAND     CONFIG_LINUX
 
-/* Hash command with SHA acceleration supported in hardware */
-#ifdef CONFIG_FSL_CAAM
-#define CONFIG_CMD_HASH
-#define CONFIG_SHA_HW_ACCEL
-#endif
-
 #include <asm/fsl_secure_boot.h>
 
 #endif /* __T1024QDS_H */