common: Add DISPLAY_BOARDINFO

[people/ms/u-boot.git] / include / configs / T1040QDS.h

diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index aa0f802233ac0d6194b5fa20536a3ce09e0c031f..c2d0facb75a737dd4a8e1e40d4b9361ff17c0fe7 100644 (file)
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -27,8 +27,6 @@
  * T1040 QDS board configuration file
  */
 #define CONFIG_T1040QDS
-#define CONFIG_PHYS_64BIT
-#define CONFIG_DISPLAY_BOARDINFO
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE       CONFIG_SYS_TEXT_BASE
@@ -65,10 +63,10 @@
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
 #define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCIE1                   /* PCIE controler 1 */
-#define CONFIG_PCIE2                   /* PCIE controler 2 */
-#define CONFIG_PCIE3                   /* PCIE controler 3 */
-#define CONFIG_PCIE4                   /* PCIE controler 4 */
+#define CONFIG_PCIE1                   /* PCIE controller 1 */
+#define CONFIG_PCIE2                   /* PCIE controller 2 */
+#define CONFIG_PCIE3                   /* PCIE controller 3 */
+#define CONFIG_PCIE4                   /* PCIE controller 4 */
 
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
@@ -411,10 +409,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
 /* Video */
 #define CONFIG_FSL_DIU_FB
 #ifdef CONFIG_FSL_DIU_FB
@@ -454,7 +448,6 @@ unsigned long get_board_ddr_clk(void);
 #define I2C_MUX_PCA_ADDR               0x77
 #define I2C_MUX_PCA_ADDR_PRI           0x77 /* Primary Mux*/
 
-
 /* I2C bus multiplexer */
 #define I2C_MUX_CH_DEFAULT      0x8
 #define I2C_MUX_CH_DIU         0xC
@@ -473,7 +466,6 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
@@ -554,7 +546,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -566,11 +557,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_EXT2
 #endif
 #endif
 
@@ -580,10 +568,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 #endif
@@ -677,7 +662,7 @@ unsigned long get_board_ddr_clk(void);
 
 /* Enable VSC9953 L2 Switch driver */
 #define CONFIG_VSC9953
-#define CONFIG_VSC9953_CMD
+#define CONFIG_CMD_ETHSW
 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR       0x14
 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR       0x18
 
@@ -708,14 +693,9 @@ unsigned long get_board_ddr_clk(void);
  * Command line configuration.
  */
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -766,7 +746,6 @@ unsigned long get_board_ddr_clk(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 
 #define CONFIG_BAUDRATE        115200
 
@@ -788,7 +767,7 @@ unsigned long get_board_ddr_clk(void);
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=t1040qds/t1040qds.dtb\0"                       \
        "bdev=sda3\0"