Kconfig: Move CONFIG_FIT and related options to Kconfig

[people/ms/u-boot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index e88cad678afceadef8f18faa226ec7588e1d57cb..84e195dbdf4e5653bacaf5d53a810a70c5b036ce 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -12,7 +12,6 @@
  */
 #define CONFIG_T104xRDB
 #define CONFIG_PHYS_64BIT
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_E500                    /* BOOKE e500 family */
@@ -432,7 +431,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR       0xfdd00000      /* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH     0xf
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW      0xfe0ec000
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW      0xfe03c000
 /* The assembler doesn't like typecast */
 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
        ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
@@ -451,7 +450,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  * shorted - index 1
  */
 #define CONFIG_CONS_INDEX      1
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         (get_bus_freq(0)/2)
@@ -463,7 +461,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x11C600)
 #define CONFIG_SYS_NS16550_COM3        (CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
-#define CONFIG_SERIAL_MULTI            /* Enable both serial ports */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
 #endif
@@ -490,15 +487,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #endif
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
@@ -540,8 +528,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_FSL_ESPI
-#define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SPI_FLASH_BAR
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
@@ -606,7 +592,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #endif
 
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
-#define CONFIG_E1000
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_DOS_PARTITION
@@ -744,7 +729,9 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifdef CONFIG_FMAN_ENET
 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
-#elif defined(CONFIG_T1040D4RDB) || defined(CONFIG_T1042D4RDB)
+#elif defined(CONFIG_T1040D4RDB)
+#define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
+#elif defined(CONFIG_T1042D4RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
 #define CONFIG_SYS_SGMII2_PHY_ADDR             0x03
 #define CONFIG_SYS_SGMII3_PHY_ADDR             0x01
@@ -761,7 +748,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
 #define CONFIG_VSC9953
-#define CONFIG_VSC9953_CMD
+#define CONFIG_CMD_ETHSW
 #ifdef CONFIG_T1040RDB
 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR       0x04
 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR       0x08
@@ -789,7 +776,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_CMD_DATE
 #endif
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
@@ -943,9 +929,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 
 #define CONFIG_BOOTCOMMAND             CONFIG_LINUX
 
-#ifdef CONFIG_SECURE_BOOT
 #include <asm/fsl_secure_boot.h>
-#define CONFIG_CMD_BLOB
-#endif
 
 #endif /* __CONFIG_H */