drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index eec297188fb3ce77d0dd314fd8be2c1fe062c622..b0b8b09719ca3158e43960b4a8b9a1caace5ddaf 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -11,41 +11,21 @@
  * T104x RDB board configuration file
  */
 #define CONFIG_T104xRDB
-#define CONFIG_PHYS_64BIT
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_E500                    /* BOOKE e500 family */
 #include <asm/config_mpc85xx.h>
 
 #ifdef CONFIG_RAMBOOT_PBL
+
+#ifndef CONFIG_SECURE_BOOT
 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
-#ifdef CONFIG_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
-#endif
-#ifdef CONFIG_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
-#endif
-#ifdef CONFIG_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
-#endif
-#ifdef CONFIG_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg
-#endif
-#ifdef CONFIG_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_PBI \
+               $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
 #endif
 
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x30001000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
@@ -61,19 +41,46 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define BOOT_PAGE_OFFSET               0x27000
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_U_BOOT_HDR_SIZE         (16 << 10)
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image.
+ */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((768 << 10) + \
+                                        CONFIG_U_BOOT_HDR_SIZE)
+#else
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
+#endif
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#ifdef CONFIG_T1040RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
+#endif
+#ifdef CONFIG_T1042RDB_PI
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
+#endif
+#ifdef CONFIG_T1042RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
+#endif
+#ifdef CONFIG_T1040D4RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
+#endif
+#ifdef CONFIG_T1042D4RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
+#endif
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define        CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x30000000)
@@ -83,12 +90,31 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifndef CONFIG_SPL_BUILD
 #define        CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#ifdef CONFIG_T1040RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
+#endif
+#ifdef CONFIG_T1042RDB_PI
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
+#endif
+#ifdef CONFIG_T1042RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
+#endif
+#ifdef CONFIG_T1040D4RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
+#endif
+#ifdef CONFIG_T1042D4RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
+#endif
 #define CONFIG_SPL_SPI_BOOT
 #endif
 
 #ifdef CONFIG_SDCARD
 #define        CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x30000000)
@@ -98,6 +124,26 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifndef CONFIG_SPL_BUILD
 #define        CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#ifdef CONFIG_T1040RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
+#endif
+#ifdef CONFIG_T1042RDB_PI
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
+#endif
+#ifdef CONFIG_T1042RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
+#endif
+#ifdef CONFIG_T1040D4RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
+#endif
+#ifdef CONFIG_T1042D4RDB
+#define CONFIG_SYS_FSL_PBL_RCW \
+$(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
+#endif
 #define CONFIG_SPL_MMC_BOOT
 #endif
 
@@ -113,7 +159,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_DEEP_SLEEP
 #if defined(CONFIG_DEEP_SLEEP)
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SILENT_CONSOLE
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
@@ -128,12 +173,11 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_SYS_NUM_CPC             CONFIG_NUM_DDR_CONTROLLERS
 #define CONFIG_FSL_IFC                 /* Enable IFC Support */
 #define CONFIG_FSL_CAAM                        /* Enable SEC/CAAM */
-#define CONFIG_PCI                     /* Enable PCI/PCIE */
 #define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCIE1                   /* PCIE controler 1 */
-#define CONFIG_PCIE2                   /* PCIE controler 2 */
-#define CONFIG_PCIE3                   /* PCIE controler 3 */
-#define CONFIG_PCIE4                   /* PCIE controler 4 */
+#define CONFIG_PCIE1                   /* PCIE controller 1 */
+#define CONFIG_PCIE2                   /* PCIE controller 2 */
+#define CONFIG_PCIE3                   /* PCIE controller 3 */
+#define CONFIG_PCIE4                   /* PCIE controller 4 */
 
 #define CONFIG_FSL_PCI_INIT            /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT           /* enable 64-bit PCI resources */
@@ -161,6 +205,10 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              (512 * 0x800)
 #elif defined(CONFIG_NAND)
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_RAMBOOT_NAND
+#define CONFIG_BOOTSCRIPT_COPY_RAM
+#endif
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        0x2000
@@ -202,8 +250,14 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  *  Config the L3 Cache as L3 SRAM
  */
 #define CONFIG_SYS_INIT_L3_ADDR                0xFFFC0000
+/*
+ * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
+ * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
+ * (CONFIG_SYS_INIT_L3_VADDR) will be different.
+ */
+#define CONFIG_SYS_INIT_L3_VADDR       0xFFFC0000
 #define CONFIG_SYS_L3_SIZE             256 << 10
-#define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
+#define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_ENV_ADDR                        (CONFIG_SPL_GD_ADDR + 4 * 1024)
 #endif
@@ -461,13 +515,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x11C600)
 #define CONFIG_SYS_NS16550_COM3        (CONFIG_SYS_CCSRBAR+0x11D500)
 #define CONFIG_SYS_NS16550_COM4        (CONFIG_SYS_CCSRBAR+0x11D600)
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   /* determine from environment */
-#endif
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 #if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB)
 /* Video */
@@ -476,26 +523,12 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_FSL_DIU_CH7301
 #define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_VIDEO
 #define CONFIG_CMD_BMP
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_CFB_CONSOLE_ANSI
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_VIDEO_BMP_LOGO
 #endif
 #endif
 
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_STDOUT_VIA_ALIAS
-
-/* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL             /* Use FSL common I2C driver */
@@ -538,7 +571,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  * eSPI - Enhanced SPI
  */
 #define CONFIG_SPI_FLASH_BAR
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 #define CONFIG_ENV_SPI_BUS              0
@@ -620,7 +652,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 /*
@@ -632,11 +663,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_EXT2
 #endif
 #endif
 
@@ -645,10 +673,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifdef CONFIG_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
 
@@ -724,7 +749,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #endif
 #endif
 
-
 #define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
 #define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 #endif /* CONFIG_NOBQFMAN */
@@ -784,13 +808,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #ifdef CONFIG_T1042RDB_PI
 #define CONFIG_CMD_DATE
 #endif
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ERRATA
-#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
 #ifdef CONFIG_PCI
@@ -858,7 +877,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 
-#define CONFIG_BOOTDELAY       10      /*-1 disables auto-boot*/
 
 #define CONFIG_BAUDRATE        115200
 
@@ -900,7 +918,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=" __stringify(FDTFILE) "\0"                    \
        "bdev=sda3\0"
 
@@ -940,8 +958,4 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 
 #include <asm/fsl_secure_boot.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CMD_BLOB
-#endif
-
 #endif /* __CONFIG_H */