Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig

[people/ms/u-boot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index a8f4f742e621c3914bcd6c877c07d131b8dafd3c..d7decefcc1e24b5aa4c931318dfaa4de7d74e457 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -11,14 +11,20 @@
  * T104x RDB board configuration file
  */
 #define CONFIG_T104xRDB
-#define CONFIG_PHYS_64BIT
 #define CONFIG_DISPLAY_BOARDINFO
 
 #define CONFIG_E500                    /* BOOKE e500 family */
 #include <asm/config_mpc85xx.h>
 
 #ifdef CONFIG_RAMBOOT_PBL
+
+#ifndef CONFIG_SECURE_BOOT
 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_PBI \
+               $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
+#endif
+
 #ifdef CONFIG_T1040RDB
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
 #endif
@@ -37,15 +43,8 @@ $(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg
 $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #endif
 
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x30001000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
@@ -61,8 +60,17 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define BOOT_PAGE_OFFSET               0x27000
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_U_BOOT_HDR_SIZE         (16 << 10)
+/*
+ * HDR would be appended at end of image and copied to DDR along
+ * with U-Boot image.
+ */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    ((768 << 10) + \
+                                        CONFIG_U_BOOT_HDR_SIZE)
+#else
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
+#endif
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
@@ -88,7 +96,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 
 #ifdef CONFIG_SDCARD
 #define        CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x30000000)
@@ -161,6 +168,10 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_ENV_SIZE                        0x2000
 #define CONFIG_ENV_OFFSET              (512 * 0x800)
 #elif defined(CONFIG_NAND)
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_RAMBOOT_NAND
+#define CONFIG_BOOTSCRIPT_COPY_RAM
+#endif
 #define CONFIG_SYS_EXTRA_ENV_RELOC
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE                        0x2000
@@ -202,8 +213,14 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
  *  Config the L3 Cache as L3 SRAM
  */
 #define CONFIG_SYS_INIT_L3_ADDR                0xFFFC0000
+/*
+ * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
+ * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
+ * (CONFIG_SYS_INIT_L3_VADDR) will be different.
+ */
+#define CONFIG_SYS_INIT_L3_VADDR       0xFFFC0000
 #define CONFIG_SYS_L3_SIZE             256 << 10
-#define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
+#define CONFIG_SPL_GD_ADDR             (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_ENV_ADDR                        (CONFIG_SPL_GD_ADDR + 4 * 1024)
 #endif
@@ -617,7 +634,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #endif
@@ -873,7 +889,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=" __stringify(RAMDISKFILE) "\0"            \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=" __stringify(FDTFILE) "\0"                    \
        "bdev=sda3\0"