drivers/pci/Kconfig: Add PCI

[people/ms/u-boot.git] / include / configs / T208xRDB.h

diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h
index 5e2d65975df2792d8fb5801a27f95094df99bc3a..31e66b11b98679eb51fed4b9723b8a3c523ecf07 100644 (file)
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@@ -11,7 +11,6 @@
 #ifndef __T2080RDB_H
 #define __T2080RDB_H
 
-#define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_T2080RDB
 #define CONFIG_ICS307_REFCLK_HZ 25000000  /* ICS307 ref clk freq */
 #define CONFIG_MMC
@@ -19,7 +18,6 @@
 #define CONFIG_FSL_SATA_V2
 
 /* High Level Configuration Options */
-#define CONFIG_PHYS_64BIT
 #define CONFIG_BOOKE
 #define CONFIG_E500            /* BOOKE e500 family */
 #define CONFIG_E500MC          /* BOOKE e500mc family */
@@ -41,17 +39,9 @@
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_rcw.cfg
 
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
@@ -67,19 +57,17 @@
 #endif
 
 #ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT  "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_nand_rcw.cfg
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
-#define CONFIG_SPL_SPI_SUPPORT
-#define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
@@ -89,12 +77,12 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_spi_rcw.cfg
 #define CONFIG_SPL_SPI_BOOT
 #endif
 
 #ifdef CONFIG_SDCARD
 #define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
-#define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
 #define CONFIG_SYS_MMC_U_BOOT_DST      (0x00200000)
@@ -104,6 +92,7 @@
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 #endif
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_sd_rcw.cfg
 #define CONFIG_SPL_MMC_BOOT
 #endif
 
@@ -499,11 +488,10 @@ unsigned long get_board_ddr_clk(void);
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
-#define CONFIG_PCI             /* Enable PCI/PCIE */
-#define CONFIG_PCIE1           /* PCIE controler 1 */
-#define CONFIG_PCIE2           /* PCIE controler 2 */
-#define CONFIG_PCIE3           /* PCIE controler 3 */
-#define CONFIG_PCIE4           /* PCIE controler 4 */
+#define CONFIG_PCIE1           /* PCIE controller 1 */
+#define CONFIG_PCIE2           /* PCIE controller 2 */
+#define CONFIG_PCIE3           /* PCIE controller 3 */
+#define CONFIG_PCIE4           /* PCIE controller 4 */
 #define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT   /* enable 64-bit PCI resources */
 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
@@ -680,7 +668,6 @@ unsigned long get_board_ddr_clk(void);
  * USB
  */
 #ifdef CONFIG_USB_EHCI
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_HAS_FSL_DR_USB
@@ -773,7 +760,6 @@ unsigned long get_board_ddr_clk(void);
 /* default location for tftp and bootm */
 #define CONFIG_LOADADDR                1000000
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 #define __USB_PHY_TYPE         utmi
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
@@ -793,7 +779,7 @@ unsigned long get_board_ddr_clk(void);
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=t2080rdb/ramdisk.uboot\0"                  \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=t2080rdb/t2080rdb.dtb\0"                       \
        "bdev=sda3\0"