Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig

[people/ms/u-boot.git] / include / configs / T4240QDS.h

diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
index 91857d69970ebb746447f4987d5e0def6659e40a..fa79ac48a7b102fe29d5e42291f3a1d95a6362fb 100644 (file)
--- a/include/configs/T4240QDS.h
+++ b/include/configs/T4240QDS.h
@@ -11,7 +11,6 @@
 #define __CONFIG_H
 
 #define CONFIG_T4240QDS
-#define CONFIG_PHYS_64BIT
 
 #define CONFIG_FSL_SATA_V2
 #define CONFIG_PCIE4
@@ -27,14 +26,9 @@
 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
 #else
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
-#define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 #define CONFIG_SYS_TEXT_BASE           0x00201000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
@@ -343,7 +337,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_RAMBOOT
 #endif
 
-
 /* I2C */
 #define CONFIG_SYS_FSL_I2C_SPEED       100000  /* I2C speed */
 #define CONFIG_SYS_FSL_I2C2_SPEED      100000  /* I2C2 speed */
@@ -401,11 +394,9 @@ unsigned long get_board_ddr_clk(void);
 /*
  * eSPI - Enhanced SPI
  */
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
 
-
 /* Qman/Bman */
 #ifndef CONFIG_NOBQFMAN
 #define CONFIG_SYS_DPAA_QBMAN          /* Support Q/Bman */
@@ -493,7 +484,6 @@ unsigned long get_board_ddr_clk(void);
 #define FM2_10GEC2_PHY_ADDR    0x3
 #endif
 
-
 /* SATA */
 #ifdef CONFIG_FSL_SATA_V2
 #define CONFIG_LIBATA
@@ -510,7 +500,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA
 #define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
 #endif
 
 #ifdef CONFIG_FMAN_ENET
@@ -528,12 +517,9 @@ unsigned long get_board_ddr_clk(void);
 /*
 * USB
 */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_CMD_EXT2
 #define CONFIG_HAS_FSL_DR_USB
 
 #define CONFIG_MMC
@@ -542,10 +528,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 #define CONFIG_ESDHC_DETECT_QUIRK \
@@ -555,7 +538,6 @@ unsigned long get_board_ddr_clk(void);
        (!(readb(QIXIS_BASE + QIXIS_BRDCFG5) & QIXIS_MUX_SDHC_WIDTH8))
 #endif
 
-#define CONFIG_BOOTDELAY       10      /* -1 disables auto-boot */
 
 #define __USB_PHY_TYPE utmi
 
@@ -588,7 +570,7 @@ unsigned long get_board_ddr_clk(void);
        "consoledev=ttyS0\0"                                    \
        "ramdiskaddr=2000000\0"                                 \
        "ramdiskfile=t4240qds/ramdisk.uboot\0"                  \
-       "fdtaddr=c00000\0"                                      \
+       "fdtaddr=1e00000\0"                                     \
        "fdtfile=t4240qds/t4240qds.dtb\0"                               \
        "bdev=sda3\0"