Convert CONFIG_CMD_BSP to Kconfig

[people/ms/u-boot.git] / include / configs / TQM5200.h

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 6a9f64e17bed1a621c5bd9156efb62503f016d48..0fdc62ec1490d3732e3ae982ead9be85244b5e14 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2003-2005
+ * (C) Copyright 2003-2014
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2004-2006
@@ -16,8 +16,7 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU               */
-#define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU)      */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU               */
 #define CONFIG_TQM5200         1       /* ... on TQM5200 module                */
 #undef CONFIG_TQM5200_REV100           /*  define for revision 100 modules     */
 
@@ -46,14 +45,11 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE     1       /* console is on PSC1                   */
-#define CONFIG_BAUDRATE                115200  /* ... at 115200 bps                    */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 #define CONFIG_BOOTCOUNT_LIMIT 1
 
 #ifdef CONFIG_FO300
 #define CONFIG_SYS_DEVICE_NULLDEV              1       /* enable null device */
-#define CONFIG_SILENT_CONSOLE          1       /* enable silent startup */
-#define CONFIG_BOARD_EARLY_INIT_F      1       /* used to detect S1 switch position */
 #define CONFIG_USB_BIN_FIXUP           1       /* for a buggy USB device */
 #if 0
 #define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED    1       /* silent console on PSC1 when S1 */
@@ -78,8 +74,6 @@
  * 0x50000000 - 0x50ffffff - PCI IO Space
  */
 #if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
-#define CONFIG_PCI             1
-#define CONFIG_PCI_PNP         1
 /* #define CONFIG_PCI_SCAN_SHOW        1 */
 
 #define CONFIG_PCI_MEM_BUS     0x40000000
@@ -99,38 +93,25 @@
  * Video console
  */
 #ifndef CONFIG_TQM5200S                /* No graphics controller on TQM5200S */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_SM501
 #define CONFIG_VIDEO_SM501_32BPP
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
 
 #ifndef CONFIG_FO300
-#define CONFIG_CONSOLE_EXTRA_INFO
 #else
 #define CONFIG_VIDEO_BMP_LOGO
 #endif
 
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #endif /* #ifndef CONFIG_TQM5200S */
 
-
 /* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 
 /* USB */
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
     defined(CONFIG_STK52XX)
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
 
 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -152,7 +133,6 @@
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
 #endif
 
-
 /*
  * BOOTP options
  */
@@ -161,28 +141,13 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_BSP
-
-#ifdef CONFIG_VIDEO
-    #define CONFIG_CMD_BMP
-#endif
 
 #ifdef CONFIG_PCI
 #define CONFIG_CMD_PCI
@@ -192,8 +157,6 @@
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
        defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
     #define CONFIG_CMD_IDE
-    #define CONFIG_CMD_FAT
-    #define CONFIG_CMD_EXT2
 #endif
 
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
@@ -206,7 +169,6 @@
     #define CONFIG_CMD_DIAG
 #endif
 
-
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 
 #if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)
@@ -216,7 +178,6 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -337,7 +298,7 @@
  *
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
- * clock over a frequency divider with only a few divider values. U-boot
+ * clock over a frequency divider with only a few divider values. U-Boot
  * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
@@ -493,7 +454,6 @@
 #define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE
 #endif
 
-
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -605,10 +565,8 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define        CONFIG_SYS_HUSH_PARSER          1       /* use "hush" command parser    */
 
 #define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
@@ -632,13 +590,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
-/*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
 /*
  * Various low-level settings
  */
@@ -736,9 +687,6 @@
  * Open firmware flat tree support
  *-----------------------------------------------------------------------
  */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-
 #define OF_CPU                 "PowerPC,5200@0"
 #define OF_SOC                 "soc5200@f0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 4)