Convert CONFIG_VIDEO to Kconfig

[people/ms/u-boot.git] / include / configs / TQM5200.h

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index e646c0035da8ddc678d89547032748cc84856e0b..634cb2435c696f4a4ce9cb6ab664fc8de281cd01 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -19,7 +19,6 @@
 #define CONFIG_MPC5200         1       /* This is an MPC5200 CPU               */
 #define CONFIG_TQM5200         1       /* ... on TQM5200 module                */
 #undef CONFIG_TQM5200_REV100           /*  define for revision 100 modules     */
-#define CONFIG_DISPLAY_BOARDINFO
 
 /*
  * Valid values for CONFIG_SYS_TEXT_BASE are:
@@ -52,7 +51,6 @@
 
 #ifdef CONFIG_FO300
 #define CONFIG_SYS_DEVICE_NULLDEV              1       /* enable null device */
-#define CONFIG_SILENT_CONSOLE          1       /* enable silent startup */
 #define CONFIG_BOARD_EARLY_INIT_F      1       /* used to detect S1 switch position */
 #define CONFIG_USB_BIN_FIXUP           1       /* for a buggy USB device */
 #if 0
@@ -99,7 +97,6 @@
  * Video console
  */
 #ifndef CONFIG_TQM5200S                /* No graphics controller on TQM5200S */
-#define CONFIG_VIDEO
 #define CONFIG_VIDEO_SM501
 #define CONFIG_VIDEO_SM501_32BPP
 #define CONFIG_CFB_CONSOLE
@@ -117,7 +114,6 @@
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #endif /* #ifndef CONFIG_TQM5200S */
 
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -128,9 +124,6 @@
     defined(CONFIG_STK52XX)
 #define CONFIG_USB_OHCI_NEW
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_USB
 
 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
 #define CONFIG_SYS_USB_OHCI_CPU_INIT
@@ -152,7 +145,6 @@
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
 #endif
 
-
 /*
  * BOOTP options
  */
@@ -161,20 +153,13 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
 #define CONFIG_CMD_BSP
 
 #ifdef CONFIG_VIDEO
@@ -189,8 +174,6 @@
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
        defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
     #define CONFIG_CMD_IDE
-    #define CONFIG_CMD_FAT
-    #define CONFIG_CMD_EXT2
 #endif
 
 #if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
@@ -203,7 +186,6 @@
     #define CONFIG_CMD_DIAG
 #endif
 
-
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 
 #if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)
@@ -213,7 +195,6 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
        "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
@@ -490,7 +471,6 @@
 #define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE
 #endif
 
-
 #define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
@@ -604,7 +584,6 @@
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define        CONFIG_SYS_HUSH_PARSER          1       /* use "hush" command parser    */
 
 #define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
@@ -628,11 +607,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-/*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
 /*
  * Various low-level settings
  */