configs: Re-sync HUSH options

[people/ms/u-boot.git] / include / configs / TQM5200.h

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index ca415e432b9afcaeae29caa28215a96e7fff6396..8fd3a8b0d959997e58be21f2e02de9a23d62cf8d 100644 (file)
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -1,27 +1,11 @@
 /*
- * (C) Copyright 2003-2005
+ * (C) Copyright 2003-2014
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2004-2006
  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -32,10 +16,10 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5xxx         1       /* This is an MPC5xxx CPU               */
-#define CONFIG_MPC5200         1       /* (more precisely an MPC5200 CPU)      */
+#define CONFIG_MPC5200         1       /* This is an MPC5200 CPU               */
 #define CONFIG_TQM5200         1       /* ... on TQM5200 module                */
 #undef CONFIG_TQM5200_REV100           /*  define for revision 100 modules     */
+#define CONFIG_DISPLAY_BOARDINFO
 
 /*
  * Valid values for CONFIG_SYS_TEXT_BASE are:
@@ -181,8 +165,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -190,7 +172,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
@@ -353,7 +334,7 @@
  *
  * Please notice, that the resulting clock frequency could differ from the
  * configured value. This is because the I2C clock is derived from system
- * clock over a frequency divider with only a few divider values. U-boot
+ * clock over a frequency divider with only a few divider values. U-Boot
  * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
  * approximation allways lies below the configured value, never above.
  */
@@ -621,10 +602,8 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt   */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define        CONFIG_SYS_HUSH_PARSER          1       /* use "hush" command parser    */
 
 #define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */
 #if defined(CONFIG_CMD_KGDB)
@@ -648,8 +627,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x100000        /* default load address */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 /*
  * Enable loopw command.
  */
@@ -752,9 +729,6 @@
  * Open firmware flat tree support
  *-----------------------------------------------------------------------
  */
-#define CONFIG_OF_LIBFDT       1
-#define CONFIG_OF_BOARD_SETUP  1
-
 #define OF_CPU                 "PowerPC,5200@0"
 #define OF_SOC                 "soc5200@f0000000"
 #define OF_TBCLK               (bd->bi_busfreq / 4)