Kconfig: Move config IDENT_STRING to Kconfig

[people/ms/u-boot.git] / include / configs / VCMA9.h

diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 2b3d59f7268d04f2cd021742a3ac1d75872d8229..a368d818944a03fd2ed9406427567861b49fe317 100644 (file)
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -7,37 +7,21 @@
  *
  * Configuation settings for the MPL VCMA9 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-
 #define MACH_TYPE_MPL_VCMA9    227
 
 /*
  * High Level Configuration Options
  * (easy to change)
  */
-#define CONFIG_ARM920T         /* This is an ARM920T Core */
-#define CONFIG_S3C24X0         /* in a SAMSUNG S3C24x0-type SoC */
+#define CONFIG_SYS_THUMB_BUILD
+
+#define CONFIG_S3C24X0         /* This is a SAMSUNG S3C24x0-type SoC */
 #define CONFIG_S3C2410         /* specifically a SAMSUNG S3C2410 SoC */
 #define CONFIG_VCMA9           /* on a MPL VCMA9 Board  */
 #define CONFIG_MACH_TYPE       MACH_TYPE_MPL_VCMA9 /* Machine type */
@@ -64,24 +48,14 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_USB
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_YAFFS
 
 #define CONFIG_BOARD_LATE_INIT
 
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_CMDLINE_EDITING
 
 /*
@@ -89,12 +63,12 @@
  * the MPL VCMA9 is equipped with an ATMEL 24C256 EEPROM at
  * address 0x50 with 16bit addressing
  */
-#define CONFIG_HARD_I2C                                /* I2C with hardware support */
-#define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed */
-#define CONFIG_SYS_I2C_SLAVE           0x7F    /* I2C slave addr */
+#define CONFIG_SYS_I2C
 
 /* we use the built-in I2C controller */
-#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_SYS_I2C_S3C24X0
+#define CONFIG_SYS_I2C_S3C24X0_SPEED    100000 /* I2C speed */
+#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x7F   /* I2C slave addr */
 
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
@@ -127,7 +101,6 @@
 #define CONFIG_USB_OHCI
 #define CONFIG_USB_OHCI_S3C24XX
 #define CONFIG_USB_KEYBOARD
-#define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
 
 /* Enable needed helper functions */
@@ -136,16 +109,13 @@
 /* RTC */
 #define CONFIG_RTC_S3C24X0
 
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_BAUDRATE                        9600
 
-#define CONFIG_BOOTDELAY               5
 #define CONFIG_BOOT_RETRY_TIME         -1
 #define CONFIG_RESET_TO_RETRY
-#define CONFIG_ZERO_BOOTDELAY_CHECK
 
 #define CONFIG_NETMASK                 255.255.255.0
 #define CONFIG_IPADDR                  10.0.0.110
@@ -154,13 +124,10 @@
 #if defined(CONFIG_CMD_KGDB)
 /* speed to run kgdb serial port */
 #define CONFIG_KGDB_BAUDRATE           115200
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX          2       /* which serial port to use */
 #endif
 
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_PROMPT              "VCMA9 # "
 #define CONFIG_SYS_CBSIZE              256
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
@@ -178,19 +145,12 @@
 #define CONFIG_SYS_LOAD_ADDR           0x30800000
 
 /* we configure PWM Timer 4 to 1ms 1000Hz  */
-#define CONFIG_SYS_HZ                  1000
 
 /* support additional compression methods */
 #define CONFIG_BZIP2
 #define CONFIG_LZO
 #define CONFIG_LZMA
 
-/* Ident */
-/*#define VERSION_TAG "released"*/
-#define VERSION_TAG "unstable"
-#define CONFIG_IDENT_STRING "\n(c) 2003 - 2011 by MPL AG Switzerland, " \
-                           "MEV-10080-001 " VERSION_TAG
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS   1               /* we have 1 bank of DRAM */
 #define PHYS_SDRAM_1           0x30000000      /* SDRAM Bank #1 */
@@ -232,8 +192,6 @@
 #define MULTI_PURPOSE_SOCKET_ADDR      0x08000000
 
 /* File system */
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_JFFS2