drivers, block: remove sil680 driver

[people/ms/u-boot.git] / include / configs / VOM405.h

diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h
index 5daf1758635ae92281061dd874f5fefa4860e6a9..a180b381cf5281683317717fed2a0b275cd2447f 100644 (file)
--- a/include/configs/VOM405.h
+++ b/include/configs/VOM405.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2001-2004
  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
  *
- * SPDX-License-Identifier:    GPL-2.0+ 
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -16,19 +16,14 @@
  * (easy to change)
  */
 #define CONFIG_405EP           1       /* This is a PPC405 CPU         */
-#define CONFIG_4xx             1       /* ...member of PPC4xx family   */
 #define CONFIG_VOM405          1       /* ...on a VOM405 board         */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFFFC8000
 
-#define CONFIG_BOARD_EARLY_INIT_F 1    /* call board_early_init_f()    */
 #define CONFIG_MISC_INIT_R     1       /* call misc_init_r()           */
 
 #define CONFIG_SYS_CLK_FREQ    33330000 /* external frequency to pll   */
 
-#define CONFIG_BAUDRATE                9600
-#define CONFIG_BOOTDELAY       3       /* autoboot after 3 seconds     */
-
 #undef CONFIG_BOOTARGS
 #undef  CONFIG_BOOTCOMMAND
 
@@ -58,19 +53,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EEPROM
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -82,9 +64,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT      "=> "           /* Monitor Command Prompt       */
-
-#undef CONFIG_SYS_HUSH_PARSER                  /* use "hush" command parser    */
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size      */
@@ -97,13 +76,10 @@
 
 #define CONFIG_SYS_DEVICE_NULLDEV      1       /* include nulldev device       */
 
-#define CONFIG_SYS_CONSOLE_INFO_QUIET  1       /* don't print console @ startup*/
-
 #define CONFIG_SYS_MEMTEST_START       0x0400000       /* memtest works on     */
 #define CONFIG_SYS_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 
 #define CONFIG_CONS_INDEX      1       /* Use UART0                    */
-#define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_serial_clock()
@@ -119,12 +95,7 @@
 #define CONFIG_SYS_LOAD_ADDR   0x100000        /* default load address */
 #define CONFIG_SYS_EXTBDINFO   1               /* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ          1000            /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_ZERO_BOOTDELAY_CHECK    /* check for keypress on bootdelay==0 */
-
-#define CONFIG_VERSION_VARIABLE 1      /* include version env variable */
 
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* use 16 rx buffer on 405 emac */