* (C) Copyright 2010
* Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
* (easy to change)
*/
-#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */
+#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */
#define CONFIG_A4M072 1 /* ... on A4M072 board */
#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SYS_TEXT_BASE 0xFE000000
#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_XLB_PIPELINING 1
-#undef CONFIG_NET_MULTI
-#undef CONFIG_EEPRO100
+#undef CONFIG_EEPRO100
/* Partitions */
#define CONFIG_MAC_PARTITION
/*
* Command line configuration.
*/
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
-#define CONFIG_CMD_NFS
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_USB
#define CONFIG_CMD_MII
#define CONFIG_CMD_PCI
#endif
-#if (TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */
#define CONFIG_SYS_LOWBOOT 1
#define CONFIG_SYS_LOWBOOT32 1
#endif
#define CONFIG_SYS_AUTOLOAD "n"
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "asdfg"
-
#undef CONFIG_BOOTARGS
#define CONFIG_PREBOOT "run try_update"
#define CONFIG_EXTRA_ENV_SETTINGS \
- "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \
- "cf1=diskboot 200000 0:1\0" \
- "bootcmd_cf1=run bcf1\0" \
- "bcf=setenv bootargs root=/dev/hda3\0" \
- "bootcmd_nfs=run bnfs\0" \
- "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs\0" \
- "bootcmd_nor=cp.b ${kernel_addr} 200000 100000; run norargs addip; run bk\0" \
- "bnfs=nfs 200000 ${rootpath}/boot/uImage ; run nfsargs addip ; run bk\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
- "try_update=usb start;sleep 2;usb start;sleep 1;fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;source 2F0000\0" \
- "env_addr=FE060000\0" \
- "kernel_addr=FE100000\0" \
- "rootfs_addr=FE200000\0" \
- "add_mtd=setenv bootargs ${bootargs} mtdparts=phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \
- "bcf1=run cf1; run bcf; run addip; run bk\0" \
- "add_consolespec=setenv bootargs ${bootargs} console=/dev/null quiet\0" \
- "addip=if test \"${ethaddr}\" != \"00:00:00:00:00:00\" ; then if test -n ${ipaddr}; then setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1; fi ; fi\0" \
- "hostname=CPUP0\0" \
- "ethaddr=00:00:00:00:00:00\0" \
- "netdev=eth0\0" \
- "bootcmd=run bootcmd_nor\0" \
+ "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \
+ "cf1=diskboot 200000 0:1\0" \
+ "bootcmd_cf1=run bcf1\0" \
+ "bcf=setenv bootargs root=/dev/hda3\0" \
+ "bootcmd_nfs=run bnfs\0" \
+ "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\
+ "panic=1\0" \
+ "bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \
+ "run norargs addip; run bk\0" \
+ "bnfs=nfs 200000 ${rootpath}/boot/uImage;" \
+ "run nfsargs addip ; run bk\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "try_update=usb start;sleep 2;usb start;sleep 1;" \
+ "fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \
+ "source 2F0000\0" \
+ "env_addr=FE060000\0" \
+ "kernel_addr=FE100000\0" \
+ "rootfs_addr=FE200000\0" \
+ "add_mtd=setenv bootargs ${bootargs} mtdparts=" \
+ "phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \
+ "bcf1=run cf1; run bcf; run addip; run bk\0" \
+ "add_consolespec=setenv bootargs ${bootargs} " \
+ "console=/dev/null quiet\0" \
+ "addip=if test -n ${ethaddr};" \
+ "then if test -n ${ipaddr};" \
+ "then setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:"\
+ "${netmask}:${hostname}:${netdev}:off;" \
+ "fi;" \
+ "else;" \
+ "setenv bootargs ${bootargs} no_ethaddr;" \
+ "fi\0" \
+ "hostname=CPUP0\0" \
+ "netdev=eth0\0" \
+ "bootcmd=run bootcmd_nor\0" \
""
/*
* IPB Bus clocking configuration.
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START}
+#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE}
/*
* Environment settings
/* Use SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
-#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
*/
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING 1
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if defined(CONFIG_CMD_KGDB)
# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
* Open firmware flat tree support
*-----------------------------------------------------------------------
*/
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-
#define OF_CPU "PowerPC,5200@0"
#define OF_SOC "soc5200@f0000000"
#define OF_TBCLK (bd->bi_busfreq / 4)
projects / people / ms / u-boot.git / blobdiff