Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / adp-ag101p.h

diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
index 7b9470c801d9c6636a4ee776ff8813deeea156fa..fb5fa21c6311e4b5db19a35ba508f244458b14e0 100644 (file)
--- a/include/configs/adp-ag101p.h
+++ b/include/configs/adp-ag101p.h
@@ -14,33 +14,23 @@
 /*
  * CPU and Board Configuration Options
  */
-#define CONFIG_ADP_AG101P
-
 #define CONFIG_USE_INTERRUPT
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
-#define CONFIG_SYS_GENERIC_GLOBAL_DATA
+#define CONFIG_ARCH_MAP_SYSMEM
 
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG                     /* send commandline to Kernel */
-#define CONFIG_SETUP_MEMORY_TAGS       /* send memory definition to kernel */
-#define CONFIG_INITRD_TAG                      /* send initrd params */
-#define CONFIG_NEEDS_MANUAL_RELOC
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_SERVERIP
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_MEM_REMAP
 #endif
 
 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE   0x00500000
-#else
-#ifdef CONFIG_MEM_REMAP
-#define CONFIG_SYS_TEXT_BASE   0x80000000
-#else
-#define CONFIG_SYS_TEXT_BASE   0x00000000
+#ifdef CONFIG_OF_CONTROL
+#undef CONFIG_OF_SEPARATE
+#define CONFIG_OF_EMBED
 #endif
 #endif
 
@@ -85,50 +75,23 @@
  */
 
 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
-#define CONFIG_BAUDRATE                        38400
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_COM1                CONFIG_FTUART010_02_BASE
+#ifndef CONFIG_DM_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    -4
+#endif
 #define CONFIG_SYS_NS16550_CLK         ((18432000 * 20) / 25)  /* AG101P */
 
-/*
- * Ethernet
- */
-#define CONFIG_FTMAC100
-
-#define CONFIG_BOOTDELAY       3
-
 /*
  * SD (MMC) controller
  */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FTSDC010
 #define CONFIG_FTSDC010_NUMBER         1
 #define CONFIG_FTSDC010_SDIO
 
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_DATE
-
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_SYS_CBSIZE      256             /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE      \
-       (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS     16
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
 /*
  * Size of malloc() pool
@@ -359,7 +322,9 @@
  * There are 4 banks supported for this Controller,
  * but we have only 1 bank connected to flash on board
  */
+#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
 #define CONFIG_SYS_MAX_FLASH_BANKS     1
+#endif
 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
 
 /* max number of sectors on one chip */
@@ -368,9 +333,19 @@
 #define CONFIG_SYS_MAX_FLASH_SECT      512
 
 /* environments */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR                        (CONFIG_SYS_MONITOR_BASE + 0x140000)
 #define CONFIG_ENV_SIZE                        8192
 #define CONFIG_ENV_OVERWRITE
 
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+
+/* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ   (64 << 20)
+/* Increase max gunzip size */
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)
+
 #endif /* __CONFIG_H */