rename CFG_ENV_IS_IN_FLASH in CONFIG_ENV_IS_IN_FLASH

[people/ms/u-boot.git] / include / configs / aev.h

diff --git a/include/configs/aev.h b/include/configs/aev.h
index f6f530cedbd6c33b748dd6a2e9f3e0c975b02353..bd7dab2f7bb397101cda5e55d2e236422234a58c 100644 (file)
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -41,14 +41,11 @@
 #define CONFIG_AEVFIFO         1
 #define CFG_MPC5XXX_CLKIN      33000000 /* ... running at 33.000000MHz */
 
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
+
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM          0x02    /* Software reboot           */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -65,6 +62,7 @@
 #define CONFIG_PCI             1
 #define CONFIG_PCI_PNP         1
 /* #define CONFIG_PCI_SCAN_SHOW        1 */
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE                1
 
 #define CONFIG_PCI_MEM_BUS     0x40000000
 #define CONFIG_PCI_MEM_PHYS    CONFIG_PCI_MEM_BUS
@@ -91,34 +89,42 @@
                                 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif
 
+
 /*
- * Supported commands
+ * BOOTP options
  */
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               ADD_BMP_CMD     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_ECHO    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_POST_DIAG | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SNTP    )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define        CONFIG_TIMESTAMP                /* display image timestamps */
 
@@ -132,7 +138,7 @@
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT "echo;" \
-       "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+       "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
        "echo"
 
 #undef CONFIG_BOOTARGS
@@ -219,7 +225,7 @@
 
 /* use CFI flash driver if no module variant is spezified */
 #define CFG_FLASH_CFI          1       /* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER   1       /* Use the common driver */
+#define CONFIG_FLASH_CFI_DRIVER        1       /* Use the common driver */
 #define CFG_FLASH_BANKS_LIST   { CFG_BOOTCS_START }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_SIZE         0x04000000 /* 64 MByte */
@@ -240,7 +246,7 @@
 /*
  * Environment settings
  */
-#define CFG_ENV_IS_IN_FLASH    1
+#define CONFIG_ENV_IS_IN_FLASH 1
 #define CFG_ENV_SIZE           0x10000
 #define CFG_ENV_SECT_SIZE      0x20000
 #define CFG_ENV_ADDR_REDUND    (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
@@ -324,7 +330,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -343,9 +349,13 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW