Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / am3517_crane.h

diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 0502b567e6582fb92bd039a189da9d5f00b7be7f..03b7c265a0a7acb7a8439f2990657bbf2bf47ba9 100644 (file)
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -16,7 +16,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_EMIF4   /* The chip has EMIF4 controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap.h>
@@ -73,15 +72,12 @@
  * Enable CONFIG_USB_MUSB_HCD for Host functionalities MSC, keyboard
  * Enable CONFIG_USB_MUSB_UDC for Device functionalities.
  */
-#define CONFIG_USB_AM35X               1
-#define CONFIG_USB_MUSB_HCD                    1
 
 #ifdef CONFIG_USB_AM35X
 
 #ifdef CONFIG_USB_MUSB_HCD
 
 #ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT "usb start"
 #endif /* CONFIG_USB_KEYBOARD */
 
@@ -101,8 +97,6 @@
 #endif /* CONFIG_USB_AM35X */
 
 #define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
 
 /*
  * Board NAND Info.
@@ -161,19 +155,12 @@
                "fi; " \
        "else run nandboot; fi"
 
-#define CONFIG_AUTO_COMPLETE   1
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS             32      /* max number of command */
                                                /* args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE            (CONFIG_SYS_CBSIZE)
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START       (OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END         (OMAP34XX_SDRC_CS0 + \
@@ -212,12 +199,9 @@
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_NAND_OMAP_GPMC
-#define SMNAND_ENV_OFFSET              0x260000 /* environment starts here */
-
 #define CONFIG_SYS_ENV_SECT_SIZE       (128 << 10)     /* 128 KiB sector */
-#define CONFIG_ENV_OFFSET              SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
+#define CONFIG_ENV_OFFSET              0x260000
+#define CONFIG_ENV_ADDR                        0x260000
 
 /*-----------------------------------------------------------------------
  * CFI FLASH driver setup
@@ -242,8 +226,6 @@
                                         GENERATED_GBL_DATA_SIZE)
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE           0x40200800
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
                                         CONFIG_SPL_TEXT_BASE)
@@ -259,7 +241,6 @@
 #define CONFIG_SPL_NAND_ECC
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
@@ -280,7 +261,6 @@
  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  * other needs.
  */
-#define CONFIG_SYS_TEXT_BASE           0x80100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000