flash: complete CONFIG_SYS_NO_FLASH move with renaming

[people/ms/u-boot.git] / include / configs / am3517_crane.h

diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 698c924ea6de4b56cb7ca745a37d899ff9cc6e3c..18938bf7dcf4e59cd049c28fe3a57908c585225c 100644 (file)
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -18,7 +18,6 @@
  */
 #define CONFIG_OMAP            1       /* in a TI OMAP core */
 #define CONFIG_OMAP3_AM3517CRANE       1       /* working with CRANEBOARD */
-#define CONFIG_OMAP_COMMON
 /* Common ARM Erratas */
 #define CONFIG_ARM_ERRATA_454179
 #define CONFIG_ARM_ERRATA_430973
@@ -29,12 +28,6 @@
 #include <asm/arch/cpu.h>              /* get chip and board defs */
 #include <asm/arch/omap.h>
 
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO         1
-#define CONFIG_DISPLAY_BOARDINFO       1
-
 /* Clock Defines */
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
@@ -82,10 +75,6 @@
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
-#define CONFIG_GENERIC_MMC             1
-#define CONFIG_MMC                     1
-#define CONFIG_OMAP_HSMMC              1
-#define CONFIG_DOS_PARTITION           1
 
 /*
  * USB configuration
@@ -99,8 +88,6 @@
 
 #ifdef CONFIG_USB_MUSB_HCD
 
-#define CONGIG_CMD_STORAGE
-
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT "usb start"
@@ -112,7 +99,6 @@
 /* USB device configuration */
 #define CONFIG_USB_DEVICE              1
 #define CONFIG_USB_TTY                 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
 /* Change these to suit your needs */
 #define CONFIG_USBD_VENDORID           0x0451
 #define CONFIG_USBD_PRODUCTID          0x5678
@@ -127,7 +113,6 @@
 
 #define CONFIG_CMD_NAND                /* NAND support                 */
 
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
@@ -282,15 +267,13 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
 
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT