Convert CONFIG_CMD_JFFS2 to Kconfig

[people/ms/u-boot.git] / include / configs / am3517_crane.h

diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 1379795ffa7118298e1a6760ade1f0c3a011bb0a..eb768b9e97bc7c547f064ae69e614cf449ae6713 100644 (file)
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -16,14 +16,6 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP            1       /* in a TI OMAP core */
-#define CONFIG_OMAP3_AM3517CRANE       1       /* working with CRANEBOARD */
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
-
 #define CONFIG_EMIF4   /* The chip has EMIF4 controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
@@ -73,13 +65,8 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
-#define CONFIG_GENERIC_MMC             1
-#define CONFIG_MMC                     1
-#define CONFIG_OMAP_HSMMC              1
-#define CONFIG_DOS_PARTITION           1
 
 /*
  * USB configuration
@@ -93,8 +80,6 @@
 
 #ifdef CONFIG_USB_MUSB_HCD
 
-#define CONGIG_CMD_STORAGE
-
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL
 #define CONFIG_PREBOOT "usb start"
@@ -106,7 +91,6 @@
 /* USB device configuration */
 #define CONFIG_USB_DEVICE              1
 #define CONFIG_USB_TTY                 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV   1
 /* Change these to suit your needs */
 #define CONFIG_USBD_VENDORID           0x0451
 #define CONFIG_USBD_PRODUCTID          0x5678
@@ -117,11 +101,9 @@
 #endif /* CONFIG_USB_AM35X */
 
 /* commands to include */
-#define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
 
 #define CONFIG_CMD_NAND                /* NAND support                 */
 
-#define CONFIG_SYS_NO_FLASH
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
 #define CONFIG_SYS_OMAP24_I2C_SLAVE    1
@@ -267,7 +249,6 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE           0x40200800
 #define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
@@ -276,15 +257,13 @@
 #define CONFIG_SPL_BSS_START_ADDR      0x80000000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000         /* 512 KB */
 
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     0x200 /* 256 KB */
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
 
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT            "arch/arm/mach-omap2/u-boot-spl.lds"
 
 /* NAND boot config */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT