Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

[people/ms/u-boot.git] / include / configs / am3517_evm.h

diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 708a98f8270948e9edbe772528c1520e1e1061ef..214d9c54c2b6ae868552a5f6f5a75c077b3fad37 100644 (file)
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -21,7 +21,7 @@
  * header. That is 0x800FFFC0--0x80100000 should not be used for any
  * other needs.
  */
-#define CONFIG_SYS_TEXT_BASE           0x80100000
+
 #define CONFIG_SYS_SPL_MALLOC_START    0x80208000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 
@@ -33,16 +33,6 @@
 
 /* Hardware drivers */
 
-/* NS16550 Configuration */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE    (-4)
-
-/* select serial console configuration */
-#define CONFIG_CONS_INDEX              3
-#define CONFIG_SYS_NS16550_COM3                OMAP34XX_UART3
-#define CONFIG_SERIAL3                 3       /* UART3 on AM3517 EVM */
-
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
@@ -51,8 +41,6 @@
  * Enable CONFIG_USB_MUSB_HOST for Host functionalities MSC, keyboard
  * Enable CONFIG_USB_MUSB_GADGET for Device functionalities.
  */
-#define CONFIG_USB_MUSB_AM35X
-#define CONFIG_USB_MUSB_PIO_ONLY
 
 #ifdef CONFIG_USB_MUSB_AM35X
 
@@ -64,34 +52,23 @@
 
 #endif /* CONFIG_USB_MUSB_HOST */
 
-#ifdef CONFIG_USB_MUSB_GADGET
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_RNDIS
-#endif /* CONFIG_USB_MUSB_GADGET */
-
 #endif /* CONFIG_USB_MUSB_AM35X */
 
 /* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED    100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE    1
 
 /* Ethernet */
 #define CONFIG_DRIVER_TI_EMAC
 #define CONFIG_DRIVER_TI_EMAC_USE_RMII
 #define CONFIG_MII
 #define CONFIG_BOOTP_DEFAULT
-#define CONFIG_BOOTP_DNS
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT         10
 
 /* Board NAND Info. */
 #ifdef CONFIG_NAND
-#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT     64
 #define CONFIG_SYS_NAND_PAGE_SIZE      2048
@@ -123,17 +100,6 @@
  *  DTB                  4 * NAND_BLOCK_SIZE = 512 KiB  @ 0xAA0000
  *  RootFS              Remaining Flash Space           @ 0xB20000
  */
-#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"      \
-       "512k(MLO),"                                    \
-       "1920k(u-boot),"                                \
-       "256k(u-boot-env),"                             \
-       "8m(kernel),"                                   \
-       "512k(dtb),"                                    \
-       "-(rootfs)"
-#else
-#define MTDIDS_DEFAULT
-#define MTDPARTS_DEFAULT
 #endif /* CONFIG_NAND */
 
 /* Environment information */
@@ -149,8 +115,8 @@
        "bootenv=uEnv.txt\0" \
        "cmdline=\0" \
        "optargs=\0" \
-       "mtdids=" MTDIDS_DEFAULT "\0" \
-       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
        "mmcdev=0\0" \
        "mmcpart=1\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
@@ -203,9 +169,6 @@
        "else run nandboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
 
 /* We set the max number of command args high to avoid HUSH bugs. */
 #define CONFIG_SYS_MAXARGS             64
@@ -247,11 +210,8 @@
 #define CONFIG_ENV_ADDR                        0x260000
 
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
 #undef CONFIG_SPL_TEXT_BASE
 #define CONFIG_SPL_TEXT_BASE           0x40200000
-#define CONFIG_SPL_MAX_SIZE            (SRAM_SCRATCH_SPACE_ADDR - \
-                                        CONFIG_SPL_TEXT_BASE)
 
 #undef CONFIG_SPL_BSS_START_ADDR
 #define CONFIG_SPL_BSS_START_ADDR      0x80000000